1. Manuals
  2. Brands
  3. Hanover Manuals
  4. Patio Heater
  5. HAN030SSCL
  6. User manual

Hanover HAN030SSCL User Manual

Outdoor patio heater
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
R
ANS Z83.26-2014 • CSA 2.37-2014 Gas-Fired Outdoor Infrared Patio Heaters
OUTDOOR PATIO HEATER
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from the appliance
and immediately call your gas supplier or fire
department.
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance. An LP-cylinder not connected for use shall
not be stored in the vicinity of this or any other
appliance.
Improper installation, adjustment, alteration, service
or maintenance can cause property damage, injury or
death. Read the installation, operation and
R
maintenance instructions thoroughly before installing
or servicing this equipment.
R
US
Models:
DANGER
WARNING
WARNING:
CARBON MONOXIDE HAZARD
DANGER
This appliance can produce
carbon monoxide which has
no odor. Using it in an enclosed
space can kill you. Never use this
appliance in an enclosed space
such as a camper, tent, car or
home.
WARNING
1
USER MANUAL
,
HAN030SSCL
HAN031BRCL
For Outdoor Use Only

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HAN030SSCL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hanover HAN030SSCL

Summary of Contents for Hanover HAN030SSCL

  • Page 1 OUTDOOR PATIO HEATER USER MANUAL Models: HAN030SSCL HAN031BRCL DANGER If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. If odor continues, keep away from the appliance and immediately call your gas supplier or fire department.

  • Page 2: Package Contents

    PACKAGE CONTENTS Reflector Upper Protective Mesh Mesh Heating Body Gas Hose & Regulator Cylinder Housing Base Wheel QUANTITY Reflector Upper Protective Mesh Mesh Heating Body Gas Hose & Regulator Cylinder Housing Base Wheel...

  • Page 3: Safety Information

    HARDWARE CONTENTS (shown actual size) Wing nut Stud Screw M5 X 10 Qty. 3 Qty. 3 Qty. Qty. Qty. 15 Qty. 11 Wrench Philips Qty. 1 screwdriver Qty. 1 Ground Fixer Qty. 3 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product.
  • Page 4 SAFETY INFORMATION DANGER DANGER • EXPLOSION - FIRE HAZARD • CARBON MONOXIDE HAZARD • Keep solid combustibles, such as building materials, • This heater is a combustion appliance. All paper or cardboard, a safe distance away from the combustion appliances produce carbon monoxide heater as recommended by the instructions.

  • Page 5: Burn Hazard

    SAFETY INFORMATION WARNING WARNING California Proposition 65 • This product is fueled by propane gas. Propane gas Combustion by-products produced when using is invisible, odorless, and flammable. An odorant is this product contain chemicals known to the State normally added to help detect leaks and can be of California to cause cancer, birth defects, and described as a “rotten egg”...
  • Page 6 ASSEMBLY INSTRUCTIONS 1. To protect heater from strong wind, anchor the base securely to the ground with screws. 1) Reverse the base, fix the ground fixer to the base with bolts and washers like picture shows. 2) Secure the ground fixer with nuts. 3) Fix another two ground fixer with bolts and nuts, and reverse the base.
  • Page 7 ASSEMBLY INSTRUCTIONS 3. Assemble the heating body. Secue the heating body to the tank housing using 4pcs screw M5X10. Hardware Used Screw M5 X 10 Philips screwdriver 4. Assemble the mesh Secure the mesh to the Heating Body using 3pcs screw M5X10. Hardware Used Screw M5 X 10 Philips...
  • Page 8 ASSEMBLY INSTRUCTIONS 5. Assemble the upper protective mesh to the heating body directly 6. Assemble the reflector a. Screw 3pcs stud to the top of mesh, using 3pcs washer b.Put the reflector on the stud and secure them using 3pcs wing nut and 3pcs washer.
  • Page 9 ASSEMBLY INSTRUCTIONS 7. Screw gas hose and regulator to propane cylinder (not included). Do not cross-thread. Place the propane cylinder into the cylinder housing (F), then close the door. WARNING: Use a standard 20 lb. propane cylinder only. Use this heater only with a propane vapor withdrawal supply system.
  • Page 10 ASSEMBLY INSTRUCTIONS A dented, rusted or damaged propane cylinder may be hazardous and should be checked by your propane supplier. Never use a propane cylinder with a damaged valve connection. The propane cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.S.
  • Page 11 OPERATION INSTRUCTIONS Leak Check WARNING • Perform all leak tests outdoors. • Extinguish all open flames. • NEVER leak test when smoking. • Do not use the heater until all connections have been leak tested and do not leak. Hose / Regulator connection Regulator / Cylinder connection...

  • Page 12: Carbon Monoxide Hazard

    OPERATION INSTRUCTIONS DANGER • CARBON MONOXIDE HAZARD • For outdoor use only. Never use inside house, or other unventilated or enclosed areas. This heater consumes air (oxygen). Do not use in unventilated or enclosed areas to avoid endangering your life. Caution: Do not attempt to operate until you have read and understand all General Safety Information in this manual and all assembly is complete and leak checks have been performed.
  • Page 13 OPERATION INSTRUCTIONS 3. Depress control knob and turn knob counter-clockwise to IGNITE position, then to PILOT position (you will hear 2 clicks). 4. With the pilot light lit, keep control knob depressed Variable control knob for 30 seconds. (Figure 3) NOTE: If the pilot light has not ignited, turn heater control knob to OFF position, fully close gas valve, wait 5 minutes, Pointer...

  • Page 14: For Your Safety

    OPERATION INSTRUCTIONS WARNING FOR YOUR SAFETY Be careful when attempting to manually ignite this heater. Holding in the control knob for more than 10 seconds before igniting the gas will cause a ball of flame upon ignition. When heater is ON: The flame should be blue with straight yellow tops.

  • Page 15: Care And Maintenance

    OPERATION INSTRUCTIONS 9. Heater is away from gasoline or other flammable liquids or vapors. 10. Heater is away from windows, air intake openings, sprinklers and other water sources. 11. Heater is at least 24 in. on top and at least 36 in. on sides from combustible materials. 12.
  • Page 16 CARE AND MAINTENANCE Gas odor with extreme yellow tipping of flame. Heater does NOT reach the desired temperature. Heater glow is excessively uneven. Heater makes popping noises. Spiders and insects can nest in burner or orifices. This dangerous condition can damage heater and render it unsafe for use.

  • Page 17: Troubleshooting

    TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Cylinder valve is closed Open valve Clean or replace orifice or Blockage in orifice or pilot tube pilot tube Open gas line and bleed it Pilot won’t light Air in gas line (pressing control knob in) for not more than 1 - 2 minutes or until you smell gas Low gas pressure with cylinder valve...

  • Page 18: One-Year Limited Warranty

    ONE-YEAR LIMITED WARRANTY This product is inspected, tested and carefully packaged to minimize the chance of damage during shipment. If a part within one year from the date of purchase proves to be defective in material or fabrication under normal use, the part will be repaired or replaced. The Company's obligation under the warranty is to replace or repair defective parts at our discretion.

  • Page 19: Replacement Parts List

    REPLACEMENT PARTS LIST Reflector Upper Protective Mesh Mesh Heating Body Gas Hose & Regulator Cylinder Housing Base Wheel QUANTITY Reflector Upper Protective Mesh Mesh Heating Body Gas Hose & Regulator Cylinder Housing Base Wheel Printed in China...

This manual is also suitable for:

Han031brcl

Table of Contents