Page 2
2|English The symbols in instruction manual and the label on the tool Double insulated for additional protection. Read the instruction manual before using. CE conformity. Wear safety glasses, hearing protection and dust mask. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
3|English GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
4|English a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
Page 5
5|English and must be repaired. c) Disconnect the plug from the po wer source and/or the battery pack from the po wer tool be fore making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the po wer tool or these instructions to operate the po wer tool.
To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this power tool. SPECIFICATIONS RH150028S RH150028-8 RH150028-6 URH1500281-9 RH150028 URH1500281 Model No.:...
Page 7
7|English ROTARY HAMMER The rotary hammer 1pcs rotary hammer 1pcs INGCO handle 3pcs drill bits (see fig.B) 1pcs flat chisel (see fig.B) 1pcs pointed chisel (see fig.B) 1pcs carrying case 1pcs grease tube 1set carbon brushes 1pcs dust cap 1pcs operating manual...
Need help?
Do you have a question about the RH150028 and is the answer not in the manual?
Questions and answers
part 33 (Gamp), do you have a picture for me, and is it a bearing?