DZS 5266XG Quick Installation Manual

4. Web Access

You can access the unit through a web browser by using the following steps:
Connect an Ethernet cable from your computer to GE1 on the 5266XG.
①
Launch a browser or telnet session and point it to 192.168.1.1
②
Enter the username and password.
③
The default username/password is admin/dzsi
For security the password should be changed.
Information furnished by DZS is believed to be accurate and reliable. However, no responsibility is
assumed by DZS for its use, nor for any infringements of patents or other rights of third parties which may
result from its use. No license is granted by implication or otherwise under any patent or patent rights of
DZS. DZS reserves the rights to change specifications at any time without notice.
7
Quick Installation Guide
5266XG
Copyright 2023 ⓒ DZS, Inc. All Rights Reserved.
V 1.0

1. Caution

Please follow the instructions below to avoid physical injury:
You should not install the unit during a storm. Likewise you should not connect or
disconnect any line to avoid the risk of electric shock.
Caution & Warning
- This unit is indoor use and all the communication wirings are limited to inside
of the building.
- DO NOT plug in, turn on or attempt to operate an obviously damaged unit.
- Never look directly at the fiber TX port and fiber cable ends when they are
powered on.
- DO NOT use near water.
- DO NOT place near high temperature source.
- DO NOT disassemble the unit.
- DO NOT operate the unit in a location where the maximum ambient
temperature exceeds 40°C.
- Open optical connections must use a protective cap under all circumstances
to protect against physical damage and dirt.
- Before making connections, use isopropyl alcohol and non-fibrous cellulose
to clean the faces of the connectors.
- Avoid impact stresses when handling connectors. Physical damage to the
faces of optical connections impairs transmission quality (higher attenuation).
- Avoid a bend radius in excess of 30 mm for fiber optic links.
- Check the available voltage supply.
- Only use the unit in dry rooms.
- Set up the unit away from direct sunlight or other electrical equipment.
- Only connect approved accessories.
- It may only be repaired by authorized service personnel.
- This equipment is not suitable for use in locations where children are likely
to be present.
Limited Warranty
- Not covered under this warranty is defect and damage resulting from product
disassembly by yourself. And also, such behavior may amount to intellectual
property infringement.
1

2. Introduction

2.1 Package Contents

- 5266XG
- Desktop Stand
- QIG (Quick Installation Guide)

2.2 Specification

Item Specification
Uplink Interface 1 XGS-PON port (SC/APC)
Service Interface 4 10/100/1000Base-T ports (RJ45)
1 1G/2.5GBase-T port (RJ45)
VoIP Interface 2 FXS ports (RJ11)
Power Adapter Output: 12VDC/1.5A
Operating Temp. 0 to 40°C (32 to 104°F)
Operating Humidity 5 to 95% (non-condensing)
Dimensions
9.91 in (251.80 mm)
2
5.83 in
(148.1 mm)
1.5 in
(38.4 mm)