Maxlife MXBE-01 - Bluetooth TWS Earphones Manual

Table of Contents

Contents

1 INTRODUCTION
2 CHARGING THE CHARGING CASE
3 CHARGING THE EARPHONES
4 EARPHONES PAIRING
5 DEVICE OPERATION
6 LED INDICATORS
7 Documents / Resources
- 7.1 Download manual

INTRODUCTION

Thank you for purchasing a product by Maxlife. Before use, please refer to the User's manual, and save it for future reference. Do not disassemble the device on your own – all repairs should be done by a service technician. Use only original parts and accessories provided by the manufacturer. The device should not be exposed directly to water, moisture, sunlight, fire or other heat sources. We hope that the product by Maxlife fulfills your expectations.

CHARGING THE CHARGING CASE

Before the first use, please put the earphones into charging case. Connect one end of the USB cable to a USB-C port of the charging case. The other end should be connected to a power adapter (or a USB port of your computer). Then plug the power adapter into a power outlet.

Use only working charger with sufficient power.

Charging will be signaled by flashing the red LED on the charging case. Once fully charged, the LED will stop flashing. When fully charged, disconnect the charging case from the power source.

Note: A power adapter is not supplied with the earphones and should be purchased separately!

CHARGING THE EARPHONES

With a built-in rechargeable battery, the charging case can provide charging process up to 3 times for the earphones (both left and right). Please make sure the earphones are fully charged before the first use.

caution Pay attention: In case you do not use the earphones for a long time, charge the earphones at least once every 3 months.

EARPHONES PAIRING

The right (R) and left (L) earphones can work together (stereo mode).

Any earphone can work as an independent earphone (mono mode).

The earphones would enter pairing mode automatically after taking out from charging case.

Make sure the earphones and charging case are charged.
Activate Bluetooth connection on the device through which you want to connect with the earphones.
Search for a new device. The earphones will be visible as "MXBE-01" on the list.
Connect with the earphones. Certain devices require entering code "0000".
Correct connection of the earphones will be confirmed with a voice message."MXBE-01" will remember last paired device and attempt to connect with it automatically after next power on.

caution Pay attention: If pairing device is switched off or Bluetooth is disabled, after 3 minutes the earphones will turn off automatically.

DEVICE OPERATION

After the connection you can control media and phone calls.

FUNCTION	OPERATION
Power on	Take the earphones out of the charging case or press long multifunction button for 5 seconds, until earphones LED indicator lights flash blue and red, and you hear a voice prompt "Power on".
Power off	Put the earphones into the charging case or (when not paired) long press multifunction for 5 seconds until you hear a voice prompt "Power off". If you put only one earbud into the charging case, the other earbud will continue working.
Play/Pause	Press the multifunction button twice.
Play Next track	Press the multifunction button on the right earphone three times.
Play Previous track	Press the multifunction button on the left earphone three times.
Answer phone call	Press the multifunction button twice.
Hang up	Press the multifunction button twice.
Reject phone call	Press and hold the multifunction button for 2 seconds.
Voice Assistant	Press and hold the multifunction button for 2 seconds.

LED INDICATORS

LED indicator can help to understand what is going on with the earphones

INDICATOR	STATUS
The indicator on the charging case is red	Charging case is fully charged
The indicator on the charging case blinks white	Charging case battery is lower than 10%
The indicator on the charging case blinks red	Charging case is charging
The earphones indicator blinks blue and red	Earphones are in pairing mode
The indicator on the earphones is solid red/The indicator on the charging case is solid white	The earphones are charging
The indicator on the earphones is off	The earphones are fully charged

TelForceOne S.A. declares that the product is compatible with requirements and other relevant provisions of the 2014/53/UE directive. You can download the declarationon of product on website www.manual.maxlife.com.pl