Page 2
8.3 Power Cable ......................8 8.4 Blades ........................8 8.5 Label ........................8 8.6 Closing down machine ................... 8 MEFE—Mitchell Engineering Food Equipment Pty Ltd Page 2 23 Storie Street Clontarf QLD 4019 Australia +617 3283 4536 www.mefe.com.au | info@mefe.com.au...
Page 3
(hands may be hurt by blades) so please always take extreme caution. MEFE—Mitchell Engineering Food Equipment Pty Ltd Page 3 23 Storie Street Clontarf QLD 4019 Australia +617 3283 4536 www.mefe.com.au | info@mefe.com.au...
Page 5
Besides this, the temperature of the room should be controlled between +5°C and +35°C to ensure the machine functions normally. Before connecting, please check the power! The machine should be connected with current same as requested by nameplate. MEFE—Mitchell Engineering Food Equipment Pty Ltd Page 5 23 Storie Street Clontarf QLD 4019 Australia +617 3283 4536 www.mefe.com.au | info@mefe.com.au...
Page 6
While mixing if extra food should be added via the whole in the cover if needed When the machine is finished, turn the speed controlling knob down and press “OFF” to stop the machine. MEFE—Mitchell Engineering Food Equipment Pty Ltd Page 6...
Page 7
Attention: power should be cut off Clean the machine body with neutralized detergent and a wet cloth. To dry the machine a dry cloth should be used. MEFE—Mitchell Engineering Food Equipment Pty Ltd Page 7 23 Storie Street Clontarf QLD 4019 Australia +617 3283 4536 www.mefe.com.au | info@mefe.com.au...
Page 8
When the machine is to be dumped for any reason, make sure it cannot be used any more, then cut off the power. Contact the professional technical centre to disassemble the machine, and pay attention to the different type of material (details please refer back to features. MEFE—Mitchell Engineering Food Equipment Pty Ltd Page 8 23 Storie Street Clontarf QLD 4019 Australia +617 3283 4536 www.mefe.com.au | info@mefe.com.au...
Need help?
Do you have a question about the CAT 361 VC12 and is the answer not in the manual?
Questions and answers