Table of Contents
Advertisement
Temperature regulation
To set the temperature:
1. Press SET button repeatedly until you reach the desired temperature.
MAX setting is the coldest one.
2. The temperature sets 5 seconds after the last press.
The exact setting should be chosen keeping in mind that the temperature inside the appliance
depends on:
• room temperature
• how often the lid is opened
• the quantity of food stored
• the location of the appliance.
SUPER function
The SUPER function accelerates the freezing of fresh food and, at the same time, protects already
stored foodstuffs from undesired warming.
To activate the function:
1. Press SET button repeatedly until the SUPER indicator lights up.
2. The function sets 5 seconds after the last press.
The SUPER function stops automatically after 52 hours and the temperature goes back to the
previous setting.
You can stop the function manually before that time, by pressing the SET button and setting the
desired temperature.
RUNNING indicator
This indicator is on when the compressor operates and it turns off when the compressor stops
working.
Resumption function
This appliance will automatically resume the mode previously set before the electrical outage.
Temperature sensor fault alarm
When there is a disconnection or short out of the temperature sensor, as a fault alarm, the temperature
indicator will flash from left to right every 0.5 seconds.
Freezing fresh food
This appliance is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time
The maximum amount of food that can be frozen in 24 hours is specified on the rating plate (refer to
"Technical data").
Important! Start the SUPER function 24 hours before placing food in the appliance.
The freezing process lasts 24 hours, during this period do not add other food to be frozen.
13
Advertisement
Table of Contents
