Table of Contents
Advertisement
2
Before the heat cools with the heating bag applied, remove the adhesive bonding
between the front camera and the display module using the ejection pin.
Be careful not to damage the front camera and near components.
•
As the adhesive securing the camera is very strong, work slowly.
•
Be careful not to touch the ejection pin on the side of the camera.
•
If you have trouble removing the adhesive, heat the microwaveable heating
bag additionally, and apply it to the front camera module to further soften the
adhesive. When reheating, it should be heated no longer than 30 seconds.
Disassembly and Assembly
69
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SM-S908B and is the answer not in the manual?