Subscribe to Our Youtube Channel
Related Manuals for RSQ VHF-238
Summary of Contents for RSQ VHF-238
- Page 1 WIRELESS MICROPHONE WIRELESS MICROPHONE OPERATION MANUAL OPERATION MANUAL VHF-238 VHF-238...
- Page 2 VHF WIRELESS MICROPHONE OPERATION MANUAL Precautions Hand-held microphone Receiver unit/operation Installation Trouble shooting Specifications...
- Page 3 1. Unscrew the battery cover at the end of microphone, put a 9V battery into compartment with correct polarities, then close the cover. 2. Pushing "ON/OFF" switch to "ON" position, "PWR" indic ator comes on b lue. If it does n't come on, please check the voltage of battery or polarities.
- Page 4 3.Connecting the power adaptor from DC 12V of receiver to a mains power socket. 4.Switching on receiver, the power indicator comes on. 5.Switching on microphone, the "RF" indicator on receiver comes on green. The "LEVEL" indicator will light up when speak to microphone. Adjusting the volume by VOL-A and VOL-B control knobs.
- Page 5 Using the supplied screened jack-to-jack lead, connect from the MIXER jack socket to the "MIC IN" / "LINE IN"socket on amplifier. Plug the mains power adaptor from "DC 12V" jack to a suitable mains power socket. Attention in installation 1.5m higher than ground 1.5m distance from wall...
- Page 7 Quartz controlled VHF 160~270MHz 30ppm 75KHz >100dB >60dB <0.5% 80Hz~20KHz at > 30M -20~50 6dB V at S/N>20dB >50dB 50 s 1V p-p 600ohms DC 12V/ 200mA <800mW Dynamic microphone 50 s Built-in housing <10mW >40dB one 9V battery <250mW...
Need help?
Do you have a question about the VHF-238 and is the answer not in the manual?
Questions and answers