1. Manuals
  2. Brands
  3. COP-USA Manuals
  4. Network Hardware
  5. NVR2816ND-M Series
  6. User manual

COP-USA NVR2816ND-M Series User Manual

H.264 16-channel network video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NVR User Manual
For H.264 16-channel network video recorder
All rights reserved

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NVR2816ND-M Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for COP-USA NVR2816ND-M Series

  • Page 1 NVR User Manual For H.264 16-channel network video recorder All rights reserved...
  • Page 2 NVR User Manual CAUTION Please read this user manual carefully to ensure that you can use the device correctly and safely.  We do not warrant all the content is correct. The contents of this manual are subject to change without notice. ...

  • Page 3: Table Of Contents

    NVR User Manual Table of Contents 1 Introduction............................... 1 1.1 NVR Introduction ................................1 1.2 Main Features .................................. 1 2 Hardware Installation ..........................4 2.1 Install Hard Drive &DVD Writer ............................4 2.1.1 Install Hard Drive ....................................4 2.1.2 Install DVD Writer ....................................5 2.2 Front Panel Descriptions ..............................
  • Page 4 NVR User Manual 5.2 Live Configuration................................23 5.2.1 Live ........................................23 5.2.2 Main Monitor ......................................24 5.2.3 Mask ........................................24 5.3 Record Configuration ..............................25 5.3.1 Enable ........................................25 5.3.2 Record Bitrate ....................................... 25 5.3.3 Time ........................................26 5.3.4 Stamp ........................................27 5.3.5 Recycle Record ......................................
  • Page 5 NVR User Manual 5.8.3 Block/Allow list ...................................... 39 6 Search, Playback & Backup ........................40 6.1 Time Search................................... 40 6.2 Event Search ................................. 41 6.3 File Management ................................42 6.4 Backup ................................... 43 7 Manage NVR ............................44 7.1 Check System Information ............................. 44 7.1.1 System Information ....................................
  • Page 6 NVR User Manual 8.4.2 Remote Backup ..................................... 60 8.5 Remote System Configuration ............................61 8.6 Tools ....................................62 8.7 Remote Information ..............................63 9 Mobile Surveillance ..........................64 9.1 By phones with Iphone OS ............................64 9.2 By phones with Android OS ............................71 Appendix A FAQ ............................

  • Page 7: Introduction

    NVR User Manual 1 Introduction 1.1 NVR Introduction This model NVR (Network Video Recorder) is designed specially for CCTV system. It adopts high performance video processing chips and embedded Linux system. Meanwhile, it utilizes many most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc., which ensure its powerful functions and high stability.
  • Page 8 NVR User Manual RECORD & PLAYBACK  Record modes: Manual, Schedule, Motion detection and Sensor alarm recording.  Support recycle after HDD full.  Resolution, frame rate and picture quality are adjustable.  Three record search mode: time search, event search and image search. ...
  • Page 9 NVR User Manual  Support remote full menu setup, changing all the NVR parameters remotely.  Support mobile surveillance by smart phones , symbian, WinCE, Iphone or Gphone, 3G network available.  Support CMS to manage multi devices on internet.

  • Page 10: Hardware Installation

    NVR User Manual Hardware Installation Notice: Check the unit and the accessories after getting the NVR. Please don‟t power up the unit till the physical installation is complete. 2.1 Install Hard Drive &DVD Writer 2.1.1 Install Hard Drive Note: 1. This series supports eight SATA HDDs. Please select the hard drive as per the manufacturer„s recommendation. Refer to „Appendix C Compatible Devices‟.

  • Page 11: Install Dvd Writer

    NVR User Manual Step 3: Install other three HDD according to above-mentioned method. Then cover the upper iron bar and screw it firmly. Put the HDD under it and screw firmly as shown below: Step 4: Install other three HDD under the upper iron bar as shown below: Step 5: Cover the back cover of the device and screw firmly.
  • Page 12 NVR User Manual Step 2: Unscrew the four screws in the back of the front panel as shown below and then take out of the brace with a trianglar mark. Step 3: Install the DVD holder attached with the device. Please let the screw holes of the DVD aim at the holder‟s. Try to place the holder farther away from the front and then screw firmly.

  • Page 13: Front Panel Descriptions

    NVR User Manual Front Panel Descriptions Notice: The front panel descriptions are only for reference; please make the object as the standard. Item Type Name Description Channel indicator Channel indicator When the IP Camera is offline, the light turns blue. Power Power Indicator, when connected, the light is blue.

  • Page 14: Rear Panel Instructions

    NVR User Manual Direction key Change direction to select items Input button Multi-screen Change screen display mode Enter key Confirm selection IR receiver For remote controller To connect external USB devices like USB flash drive, USB HDD for USB port backup or updating firmware;...

  • Page 15: Remote Controller

    NVR User Manual Item Name Description Network port VGA port VGA output, connect to monitor To connect external USB devices like USB flash drive, USB HDD USB port for backup or updating firmware. HDMI port Connect to high-definition display device Alarm Inputs for connecting sensors Alarm in Alarm Out...
  • Page 16 NVR User Manual Fig 2-2 Remote Controller Button Function Switch off—to stop DVR. Use it before turning off the power Power Button Record Button To record manually -/-- /0-9 Digital Button Input number or choose camera Fn1 Button Unavailable temporarily Multi Button To choose multi screen display mode Next Button...
  • Page 17 NVR User Manual Clear Button To return to the previous interface Fn2 Button Unavailable temporarily Info Button Get information about DVR like firmware version, HDD information To control playback. Play/Pause/Stop/Previous Section/Next Section/Rewind/Fast Forward Snap Button To take snapshots manually Search Button To enter into search mode Cut Button To set the start/end time for backup in playback mode...

  • Page 18: Control With Mouse

    NVR User Manual  You can check the device ID of a NVR from System SetupBasicDevice ID. You can also set multiple NVRs with the same device ID however this can cause interference if the NVRs are kept close to each other. 2.5 Control with Mouse 2.5.1 Connect Mouse It supports USB mouse through the ports on the rear panel.
  • Page 19 NVR User Manual It supports digits, alphabets and symbols as inputs. Click Shift button to input Capital letters and symbols; click Shift button again to return. You can change some values using the mouse wheel, such as time. Move cursor onto the value and roll the wheel when the value blinks.

  • Page 20: Basic Function Instruction

    NVR User Manual 3 Basic Function Instruction 3.1 Startup and Shutdown Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expanding the life of your NVR. 3.1.1 Startup Step1: Connect with the source power.

  • Page 21: Login

    NVR User Manual Step1: Enter into Menu and select “Shut Down” icon to display a shutdown window. Step2: Click OK. Then the unit will power off after a while. Step3: Disconnect the power. 3.2 Login You can login or log off the NVR system. Once logged off you cannot do any other operation except changing the multi-screen display.

  • Page 22: Live Playback

    NVR User Manual Symbol Meaning Green Manual record Yellow Motion detection record Sensor Alarm record Blue Schedule record Fig 3-2 Live Preview Interface 3.3.1 Live playback Click Playback button to playback the record. Refer to Fig 3-3. You can do complete operation by clicking the buttons on screen.
  • Page 23 NVR User Manual Fig 3-3 Live Playback...

  • Page 24: Add Ip Cameras

    NVR User Manual 4 Add IP Cameras This chapter mainly introduce how to connect multiple IP cameras through NVR. Once you finish adding IP cameras, you can see the live images through the monitor of NVR. To add IP cameras: Step 1: Please Enter into MenuIP Camera tab.
  • Page 25 NVR User Manual Fig 4-3 Add Device Note: The IP address of the IP cameras and NVR must be in the same network segment. For example: If the IP address of NVR is 192.168.006.067, the IP address of IP camera must be 192.168.006.XXX. If the NVR is connected through PPPoE, the IP camera can be connect through PPPoE.

  • Page 26: Main Menu Setup Guide

    NVR User Manual 5 Main menu setup guide Click right mouse or press Exit button on the front panel to display the control bar on the bottom of the screen. Refer to Fig 5-1: Fig 5-1 Main Menu Toolbar Click the icon beside the screen mode to display a channel select dialog.

  • Page 27: Basic Configuration

    NVR User Manual Fig 5-2 System Setup 5.1 Basic configuration Basic configuration includes three sub menus: system, date & time and DST. 5.1.1 System Step1: Enter into MenuSetupBasicSystem. Refer to Fig 5-3: Step2: In this interface you can setup the device name, device ID, video format, max network user, VGA resolution and language.

  • Page 28: Date & Time

    NVR User Manual Show System Time: If selected, displays the current time during live monitoring. Max Online Users: To set the maximum number of concurrent user logins in the NVR. Show wizard: If selected, the GUI would launch the startup wizard on every boot, allowing the to do basic setup. Video Output: Resolution of live display interface, ranges from: VGA800*600, VGA1280*1024 and HDMI.

  • Page 29: Live Configuration

    NVR User Manual 5.2 Live Configuration Live configuration includes three submenus: live, main monitor and mask. 5.2.1 Live In this interface, you can setup camera name, adjust colors including brightness, hue, saturation and contrast. Step1: Enter into MenuSetupLive interface. Refer to Fig 5-6: Note: A soft keyboard will pop up by clicking the camera name.

  • Page 30: Main Monitor

    NVR User Manual 5.2.2 Main Monitor Step1: Enter into MenuSetupLiveMain Monitor tab. Refer to Fig 5-8: Step2: Select split mode: 1× 1、 2× 2、 2× 3、 3× 3、 4× 4 and channel. Click button to setup the previous channel group. Click button to set the latter channel group.

  • Page 31: Record Configuration

    NVR User Manual 5.3 Record Configuration Record configuration includes five sub menus: enable, record bit rate, time, stamp and recycle record. 5.3.1 Enable Step1: Enter into MenuSetupRecordEnable tab. Refer to Fig 5-10: Parameter Meaning Record To enable/disable recording for the channel Audio enable/disable audio...

  • Page 32: Time

    NVR User Manual Parameter Meaning Rate Range from: 1-30（NTSC）1-25(PAL) Resolution Supports 1080P, 720P, VGA Quality Unavailable Encode Max bit Ranges from 256 ~12288 kbps stream Fig 5-11 Record Configuration-Record Bit rate 5.3.3 Time Step1: Enter into MenuSetupRecordTime interface. Refer to Fig 5-12: Pre-alarm record time: The record time prior to actual triggering of an alarm i.e.

  • Page 33: Stamp

    NVR User Manual 5.3.4 Stamp Stamp： This provides an option to enable or disable the Camera Name and the Time stamp on the video. You can also choose a position for the stamp on the screen. Step1: Enter into MenuSetupRecordStamp interface. Refer to Fig 5-13: Step2: Checkmark camera name and time stamp;...

  • Page 34: Schedule Configuration

    NVR User Manual 5.4 Schedule Configuration Schedule configuration includes three sub menus: schedule, motion and alarm. 5.4.1 Schedule This tab allows defining schedule for normal recording for seven days of a week, 24 hours of a day. Every row denotes an hourly timeline for a day.

  • Page 35: Motion

    NVR User Manual 5.4.2 Motion This tab allows to setup schedule for motion based recording. Step1: Enter into MenuSetupScheduleMotion tab. Refer to Fig 5-16: Step2: The setup steps for schedule for motion based recording are similar to normal schedule setup. You can refer to 5.4.1 Schedule for details. Note: The default schedule of motion based recording is 24x7, that is, the color of schedule settings interface is dark blue.

  • Page 36: Sensor Alarm

    NVR User Manual 5.5.1 Sensor Alarm Sensor includes three sub menus: basic, alarm handling and schedule. Operate the following steps to configure sensor alarm: Step1: Enter into MenuSetupAlarmSensorBasic interface. Refer to Fig 5-18: Step2: Enable channels by checking the checkboxes beside the desired channels .

  • Page 37: Motion Alarm

    NVR User Manual Step 6: Enter into alarm tab to select the options to handle alarm. Buzzer: If selected, the local buzzer would be activated on an alarm. Full screen alarm: If selected, there will pop up the chosen channel on the monitor on an alarm trigger.
  • Page 38 NVR User Manual Step3: The setup steps of motion trigger are similar to „Alarm Handling‟. You can refer to Chapter 5.5.1 Sensor Alarm Handling for more details. Step4: Click “Setting” button under the Area to display the following picture as shown in Fig 5-23: Step5: In the Area tab, you can drag slide bar to set the sensitivity value (1-8).

  • Page 39: Other Alarm

    NVR User Manual 5.5.3 Other alarm This tab gives a choice to configure alarm for Disk Full, IP Conflict, the Disconnect event or Disk Attenuation. Step1: Enter into MenuSetupAlarmother alarm interface. Refer to Fig 5-25: Step 2: Use the dropdown menu and select the event or the alarm. Step 3: Check the required trigger options.

  • Page 40: Network Configuration

    NVR User Manual It is an inbuilt alarm output device. To setup Buzzer: Step1: Enter into MenuSetupAlarm out Buzzer tab; Step2: Checkmark Buzzer and set buzzer alarm hold time. This would trigger the buzzer when the system is in alarm. 5.6 Network Configuration Network configuration includes three submenus: network, Email and other settings.

  • Page 41: Email

    NVR User Manual 5.6.2 Email Step 1: Enter into MenuSetupNetworkEmail tab. Refer to Fig 5-28: SMTP Server/Port: The name and port number of SMTP server. Check the SSL checkbox if the server requires a secure connection (SSL); user can setup mail servers (such as Gmail) as required. Send address/password: Sender‟s email address/password Receive address: Receiver‟s email address.
  • Page 42 NVR User Manual How to apply for a domain name?  Here we take www.dyndns.com for example. Step 1: Input www.dyndns.com in the IE address bar. Click ”Free Trial of DynDNS Pro””Start the trial” to register. Step 2: Input hostname, select service type and input your IP address. The picture is shown as follows: Step 3: Click “Add to cart”.

  • Page 43: User Management Configuration

    NVR User Manual Click” Create Account” button to create user account. After that, you shall provide your card number, card expiration and security code as well as billing address. Finally click “sign up for trial” button. Now, according to the domain name registration of “DDNS”，the domain name for NVR is “abc.dyndns.tv”, username is “bcd” and password is “123456”...
  • Page 44 NVR User Manual Step 4: Click „OK‟ button to save settings. Note: When the default value of binding PC MAC address is 0, the user is not bound with the specified computer. If the bind option is used, the user would be able to log into the NVR only through the specific computer (carrying the MAC address). Fig 5-30 User Management Configuration Fig 5-31 Add-General Step 5: Select Authority tab and then assign the operation rights for particular user.

  • Page 45: Advanced

    NVR User Manual 5.8 Advanced Advanced configuration includes three submenus: Reset, Import/Export and Block/Allow list. 5.8.1 Reset This would reset the system to factory defaults and reboot the NVR. 5.8.2 Import/Export User can export the data files into mobile storage devices as backup and can also import specified data files from mobile storage device to NVR.

  • Page 46: Search, Playback & Backup

    NVR User Manual 6 Search, Playback & Backup Search configuration includes three submenus: time search, event search and file management. 6.1 Time Search Step1: Enter into MenuSearch Time search tab. Refer to Fig 6-1: Fig 6-1 Search Configuration-Time Search Step2: Select date and channels on the right hand side and press “Search” button. A date with highlighted borderline indicates presence of data.

  • Page 47: Event Search

    NVR User Manual Playback Buttons Note: When the monitor resolution is set to VGA800*600, part of the time search interface will be hidden. Click the “Expand to” button to expand the whole interface. 6.2 Event Search Step1: Enter into MenuSearchEvent Search tab. Refer to Fig 6-2: Fig 6-2 Search Configuration-Event Search...

  • Page 48: File Management

    NVR User Manual Step 2: Select date and channels on the right hand side. A data with highlighted borderline indicates presence of data. Step 3: Then checkmark Motion, Sensor or All accordingly. You can search for motion based recording and sensor based recording.

  • Page 49: Backup

    NVR User Manual Step 4: Use “All” button to lock/unlock or delete all files in the file management column. Step 5: Double click an unlocked item to playback. 6.4 Backup This unit supports backup by built-in SATA DVD Writer or USB flash drive. User also can make backup by IE browser via internet. Refer to 7.3.2 Remote backup.

  • Page 50: Manage Nvr

    NVR User Manual Manage NVR 7.1 Check System Information Check system information includes five submenus: system, event, log, network and online user. 7.1.1 System nformation In this interface, user can check the hardware version, MCU version, kernel version, device ID, etc. 7.1.2 Event nformation In this tab, you can search for events like motion, sensor and video loss.

  • Page 51: Manual Alarm

    NVR User Manual Refresh: refresh the current interface. Disconnect: Disconnect the online users to access NVR. If this function is used by the admin, the particular PC will not be able to access the device for five minutes. 7.2 Manual Alarm In this interface, user can trigger a manual alarm.

  • Page 52: Logoff

    NVR User Manual Step 1: Copy the upgrade software which gets from vendor into the USB storage device Step 2: Connect the USB flash drive to the USB port. Step 3: Enter MenuUpgrade tab. Then the upgrade software name would be displayed in the upgrade list box. Step 4: Select that software and then click upgrade button.

  • Page 53: Remote Surveillance

    NVR User Manual 8 Remote Surveillance 8.1 IE Remote Surveillance In order to view the NVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 5.6 Network Setup. This NVR supports IE browser, on Windows XP and Vista platform. 8.1.1 On LAN Step 1: Enter into the NVR‟s Main MenuSetupNetwork tab to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP in both the NVR and the router.
  • Page 54 NVR User Manual Step 3: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port number after IP address or domain name. Step 4: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to view.

  • Page 55: Remote Surveillance Through Apple Pc

    NVR User Manual Step 3: If users want to utilize dynamic domain name, please apply for a domain name in a DNS server supported by the NVR or router. Then add to the NVR or router. Step 4: The following setting steps are as the same as Step 3 and Step 4 in Point 1. 8.2 Remote Surveillance through Apple PC Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode.

  • Page 56: On Lan

    NVR User Manual 8.2.1 On LAN Step 1: After starting Apple computer, click Apple icon. The following window will pop up. Please select “System Preferences””Internet &Wireless”click “Network”. Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC.
  • Page 57 NVR User Manual Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the NVR‟s Main MenuSetupNetwork interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC.

  • Page 58: On Wan

    NVR User Manual button，the following window will pop up： Input the name and password of Apple PC and then click “OK” to install this Active X control. Step 6: After finishing installing the Active X control, please quit from the Safari browser. Right click Safari icon on the desktop and then select “Quit”...

  • Page 59: Remote Preview

    NVR User Manual 8.3 Remote Preview Fig 8-2 Remote Live Preview Symbol and function Definitions: Channel indicator Screen display mode Volume ① ② ③ Snap Start manual record Start IE record ④ ⑤ ⑥ Start Talk Playback Color ⑦ ⑧ ⑨...
  • Page 60 NVR User Manual Screen display mode: Click the icon beside the screen display mode, to display a channel select dialog as below: Take 8-channel view for example: user can checkmark 8 channels form 1-ch to 16-ch at random to display the live pictures.

  • Page 61: Remote Playback & Backup

    NVR User Manual Fig 8-4 Right Key Sub Menu Stream: The NVR supports master stream and sub stream. Master stream has higher frame rate, max 25 fps (PAL)/30 fps (NTSC ） for every channel, but it needs higher network bandwidth; second stream has low frame rate, max 6FPS (PAL)/7FPS(NTSC) for every channel, but it requires low network bandwidth as compared to the master stream.
  • Page 62 NVR User Manual Fig 8-5 Play Record File Interface This NVR supports remote time search, event search and file management. By Time Search: Step1: Enter into SearchTime search. Refer to Fig 8-6:...
  • Page 63 NVR User Manual Fig 8-6 Time Search Interface Step2: The highlight date in the area② indicates recorded data. Select the date in the area ② and record channels in area③. Step3: Click “Search” button. The record data will be displayed in the data information list box. Step 4: Set the Start time and display mode in the area①...
  • Page 64 NVR User Manual Fig 8-7 Time Search Playback By Event Search:...
  • Page 65 NVR User Manual Step1: Enter into SearchEvent Search. Refer to Fig 8-8: Fig 8-8 Event Search Interface Step 2: Click the highlight date and select record channels. Step 3: Checkmark the event type: motion and sensor. Step 4: The events will be display in the event list box by clicking Search button. Step 5: Double-click certain item to playback.

  • Page 66: Remote Backup

    NVR User Manual Fig 8-9 File Management Interface Lock: Select certain file item in the file list box and then click “Lock” button to lock this file that ca not be deleted or overlaid. Unlock: Select a locked file and then click “unlock” button to unlock this file. Delete: Select an unlock file and then click “delete”...

  • Page 67: Remote System Configuration

    NVR User Manual Fig 8-10 Remote Backup Interface Step1: Select channels, set the start and end time and then click “search‟ button to display the file information in the file list box Step2: Select backup files and click “browse” button to set the path. Then click “backup” button to start backup. The backup files will be saved on user‟s PC.

  • Page 68: Tools

    NVR User Manual Fig 8-11 Remote System Configuration The sub menu list and the options in every menu are similar to that of the NVR. Please refer to Chapter 5 Main Menu Setup Guide for more details. 8.6 Tools Click on tool‟s tab to access the disk management tool. You can view the status of the HDD, change/view the read/write properties and can also format the HDD remotely.

  • Page 69: Remote Information

    NVR User Manual 8.7 Remote Information The Info tab provides a web based interface to access the general information pertaining to the NVR‟s settings. It includes five submenus: System, Event, Log, Network and Online users. The sub menu list and the options in every menu are similar to that of the NVR.

  • Page 70: Mobile Surveillance

    NVR User Manual 9 Mobile Surveillance This NVR supports mobile surveillance by phones with android, Iphone OS. If you want to make mobile surveillance, please enable network service on the NVR first and refer to Chapter 5.6 Network configuration. The below is the use instructions on mobile client end for two OS.
  • Page 71 NVR User Manual Step 4: Input iTunes Store password and then click “OK”. The software will be installed automatically. Note: If it is the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply for one.
  • Page 72 NVR User Manual 2. Install through PC. Step 1: Install iTunes store in PC and then login Step 2: Connect iPhone and PC Step 3: Enable “search” function to search “Superlive-Pro” Step 4: Click “free application” button...
  • Page 73 NVR User Manual Step 5: Input apple ID and password, then click “acquire” Step 6: Checkmark “synchronously apply program” and “Superlive-pro”, and then click “apply” button Operation Instruction for Superlive-Pro Login interface Enter server‟s IP address (or domain name), user name and password Click “Remember server”...
  • Page 74 NVR User Manual Main Interface Image view Four channel Playback Snap Setting Record Information view Audio Server list Talk Logoff Color Single channel Image View After the image is snapped, you can click icon to enter into the image view interface. Select the image and click it to amplify this image.
  • Page 75 NVR User Manual Playback Click icon to enter into the playback interface. Then click „Search‟ button, select the time and channel to playback and click button. Now you can see the local file list. Select a file and click play button to playback. You can also copy or delete the file. Finally, click „Close‟...
  • Page 76 NVR User Manual Configuration interface Click icon to enter into Settings interface. You can set many properties, such as local, basic, live, record, schedule, alarm, network, etc. Please see chapter 5 in respect of setting steps for more details. Information View Interface Click icon to enter into information view interface.

  • Page 77: By Phones With Android Os

    NVR User Manual 9.2 By phones with Android OS Software Installation Step 1: Run Google Market program Step 2: Search”Supercam” Step 3: Press “Install” button Step 4: Click “OK” button...
  • Page 78 NVR User Manual Step 5: User can view the download and install process in notifications; Once finishing downloading, the software will install automatically. Login Enter into server‟s IP address (or domain name), user‟s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
  • Page 79 NVR User Manual playback image view 【Playback】 【Image】 record file log record device list 【Log】 【Server List】 【Live】 live view 【Settings】 software setting device 【Help】 software help Information】 information center view logoff and return to login interface 【Logoff】 Live view Stop playing Single channel display Screen mode...
  • Page 80 NVR User Manual The first picture The previous picture Next picture The last picture Zoom in Zoom out Delete Record playback Play/Pause Stop Fast forward Slow play Click Playback icon in the Main Menu interface to enter into the playback interface. First, choose channel. Second, select the record file and click it to playback.
  • Page 81 NVR User Manual Server list Add a server list Modify a server list Delete a server list Return to the previous Return interface Config interface Audio alarm enabled, when Video Loss/Sensor/Motion happen，sound alarm will be Alarm setting triggered; If shake Alarm is enabled, when Video Loss/Sensor/Motion happen，shake alarm will be triggered.
  • Page 82 NVR User Manual Information view...

  • Page 83: Appendix A Faq

    NVR User Manual Appendix A FAQ Q1. Why the NVR doesn‟t turn on even after connecting to the power? a. The power adapter could have gone bad. Please change a new power adapter b. The power from the adapter may be not enough for operating the NVR. Please use the power adaptor supplied along with the NVR.
  • Page 84 NVR User Manual c. The HDD could have gone bad. Change a new one. Q6. Cannot record a. Make sure the HDD was formatted prior to use. b. Maybe the user hasn‟t enabled the record function or has done incorrect setup. Please refer to Chapter 6. c.
  • Page 85 NVR User Manual ② select Security------Custom Level….Refer to Fig 8-1 ③ Enable all the sub options under “ActiveX controls and plug-ins”. Refer to Fig 8-2 ④ Then click ok to finish setup. b. Other plug-ins or anti-virus may block ActiveX. Please disable or do the required settings. Fig 8-1 Fig 8-2 Q9: NVR displays “please wait…”all the time...
  • Page 86 NVR User Manual Q10: How to input password and numbers in the interface? Click the password or the input box a small keyboard will pop up. Please select characters to be input (the initial password is 123456), or you can use the digital keys on the front panel, or the digital keys on the remote controller. Q11: A hard disk is being identified as a new device however it was being used with another NVR of same model.
  • Page 87 NVR User Manual PC Module Parameters Intel Core(TM)2 Duo CPU E4600 Motherboard G31/P31 chip GMA3100/NVIDIA GeForce 8400/ ATI RADEON HD3450 Windows 2000(SP4 above) /Windows XP(SP2 above) VISTA DirectX Q14: How to handle the situation that the codec Control is blocked when downloading in the VISTA or Win7 system? This problem can be fixed in two ways: Enter Control PanelUser Account and Family Safety ...
  • Page 88 NVR User Manual Q15. How to play the backup file? Insert your USB device where the backup files are saved in the USB port of PC. If your files are saved in DVR format, you must have already downloaded the backup player box before doing backup. Then double click to open your USB disk to find your backup files and backup player.

  • Page 89: Appendix B Calculate Recording Capacity

    NVR User Manual Appendix B Calculate Recording Capacity You can calculate the size of hard disk according to the saving time and NVR recording settings. The NVR uses fixed video bit rate. The below are the details at different settings. The used space (MB/H) = Bitrate ÷ 8× 3600 ÷ 1024. Bit Rate Used Resolution...

  • Page 90: Appendix C Compatible Devices

    NVR User Manual Appendix C Compatible Devices Compatible USB drive after test. Brand Capacity 512MB, 1G, 2GB Netac Kingston Aigo Smatter vider SanDisk 2. Compatible SATA CD/DVD writers after test Brand Model TECLAST GH22NP20/TL-22XD BENQ DW220S-0K4 LITEON DH—20A6S01C LITEON DH-20A4P02C SAMSUNG TS-H653B...
  • Page 91 NVR User Manual 3. Compatible HDD list Brand Capacity Seagate Barracuda 80G/160G/250G/320G /1.5T/2TB Seagate SV35.3 Seagate Pipeline HD.2 500G Maxtor Diamondmax 160G HITACHI Deskstar 80G/160G WD WD1600JS 160G Samsung HD161HJ 160G...

  • Page 92: Appendix D Specifications

    NVR User Manual Appendix D Specifications Compression format H.264 Main Profile Composite：1.0V p-p/75Ω BNC× 1, VGAX1, HDMI× 1 Video output HDMI/VGA Resolution 1920*1080/1280*1024 / 800*600 Record Resolution 1080P/720P/VGA 1080P 4 CH @ 30 FPS or 16 CH @ 7 FPS IP Input 720P 8 CH @ 30 FPS or 16 CH @ 15 FPS...
  • Page 93 450011000363 A0...

Table of Contents