Advertisement
Please read this manual to enhance your user experience. We hope you will enjoy it very much!
The Pairing Name: XLeader A8 | Battery Capacity: 1200mAh |
Charging Input: 5V / 0.5A | Charging Time: 3-4 hours |
Operating Range: 10m/33ft | Supported: A2DP,AVRCP |
Output Power: 4Ω 5W Φ40MM | Frequency Response: 40Hz-18KHz |
Signal Noise Ratio: ≥95dB | Distortion Degree: ≤1% |
Unit Weight: 180g | Unit Size: Φ85 x H30mm |
Certifications: CE RoHS FCC Giteki |
iPhone, Android Phone, Tablets, Computers, Laptops, Mac Book, Echo Dot, Kindle, MP3 Players, PSP, TV, and more.
Button:
How to Turn on/off the speaker and Switching Mode
Notice: If no Micro SD card or audio cable is plugged into the speaker, the speaker is always in Bluetooth Mode.
Button
Indicator Light:
Blue Backlight
The touchscreen has a blue backlight, which will automatically turn off to save power when not touched for 45 seconds.
Turn on the speaker and it will automatically enter Bluetooth mode. On your device, under Bluetooth, look for "XLeader A8." (For devices with Bluetooth versions under 3.0, press "Yes" to confirm pairing.) Enter a password or PIN code "0000" (four zeros), then press "Yes" or "OK" to finish pairing.
Phone/Tablet
Turn on the speaker--Open the Phone/Tablet Settings--Bluetooth--On--Searching/Scanning --XLeader A8-Paired/Connected--Play music
Computer/Laptop
Turn on the speaker--Open the Laptop Settings--Devices--Bluetooth and other devices--turn on the Bluetooth-Add Bluetooth or other devices--Bluetooth--Searching device--XLeader A8--Paired/Connected--Play music
Notice: If the computer does not have Bluetooth, please insert the Bluetooth adapter and download the Bluetooth driver to use it normally.
Mac Book:
Turn on the speaker--Open the Mac Book System Preferences--Bluetooth--turn Bluetooth on--searching device -XLeader A8--Paired/Connected--Play music
Echo Dot:
Turn on the speaker--Open Alexa APP--settings--set up a new device--Bluetooth--Pair a new device--Searching Device --XLeader A8--Paired/Connected--Play music
Kindle:
Turn on the speaker--Open Kindle Settings--Wireless--Bluetooth--Enable Bluetooth(ON)--Search for Device --XLeader A8--Paired/Connected--Play music
Insert your audio plug into the 3.5mm jack on the speaker, and connect the other side to your device.
Notice: In Line-in Mode, the speaker cannot switch between Previous and Next songs, the speaker cannot control the device's APP.
Please use your phone charger or USB port on your computer/laptop.
What if the unit doesn't charge and the LED is off?
Please check your USB and cable connections to make sure they are working properly.
In some rare cases, your phone's Bluetooth version may be out of date or some phone apps have poor compatibility with Bluetooth, resulting in playback issues. We may be able to provide an update file to resolve this.
There is a reset button inside the Aux jack. Please carefully insert a pin or toothpick into the jack and press the button briefly.
Tips:
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
You can feel confident using our XLEADER brand speaker. We offer a 3-Year warranty for quality-related issues, and Lifetime technical support.
Notice: As Amazon separates customer orders and product reviews, we can not find your order ID and email address depend on product reviews. if you have any questions, please contact us directly via the email below, we hope that our after-sales service can make you satisfied.
www.ixleader.com
*please note that unauthorized reselling of XLEADER products is prohibited.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the A8 that isn't answered in the manual? Leave your question here.