Swivel Stop; Start Using Saebomas Mini - Saebo SaeboMAS mini Product Manual

J J . . S S w w i i v v e e l l S S t t o o p p
Apply the Swivel Stop to eliminate rotation or turning of the frame when the SaeboMAS mini is
not in use. Be sure to unlock prior to use.
Unlock the Swivel Stop:
1. Pull the black knob and rotate the knob 90 degrees (See Figure 19)
Lock the Swivel Stop:
1. Rotate the black knob till it latches back into closed position (Figure 20)
2. Rotate the SaeboMAS mini till the black knob aligns with the yellow hole (Figure 21)
3. At this location, the Swivel Stop will automatically lock in place
Figure 19
Important:
Be sure to unlock the Swivel Stop Knob prior to use to avoid damage.
To start working with the SaeboMAS mini, follow the steps below:
1. Determine the right height and position of the SaeboMAS mini relative to the user
2. Decide which size Forearm Support and which accessories are needed
3. If applicable, mount the accessories correctly
4. Check if the Height Adjustment Knob on the Table Mount is secure
5. Check if the accessories are securely mounted
6. Check if the Tension Indication Knob is at the lowest position
7. Loosen the Swivel Stop
8. Unclip the Horizontal Bar
9. Put the user's forearm in the Forearm Support and apply the Forearm strap
10. Apply the right compensation level
To stop working with the SaeboMAS mini follow the steps below:
1. Turn the compensation level to minimal
2. Unstrap the arm
3. Clip in the Horizontal bar
4. Tighten the Swivel Stop
Figure 20

Start using SaeboMAS mini

13
SaeboMAS mini Product Manual
Figure 21