Table of Contents
Advertisement
•
Move the Wi-Fi® access point away from any potential obstructions or interference.
•
Don't cover the Wi-Fi® antenna area of your device (the highlighted area in the
illustration).
Wi-Fi® settings
When you are connected to a Wi-Fi® network or when there are Wi-Fi® networks
available in your vicinity, it is possible to view the status of these networks. You can also
enable your device to notify you whenever an open Wi-Fi® network is detected.
If you are not connected to a Wi-Fi® network, your device uses a cellular data
connection to access the Internet (if you have set up and enabled a cellular data
connection on your device). By adding a Wi-Fi® sleep policy, you can specify when to
switch from Wi-Fi® to cellular data.
To Enable Wi-Fi® Network Notifications
1
Turn on Wi-Fi®, if it is not already on.
2
From your Home screen, tap
3
Find and tap Settings > Wi-Fi.
4
Tap > Advanced.
5
Drag the slider beside Network notification to the right.
To view detailed information about a connected Wi-Fi® network
1
From the Home screen, tap
2
Find and tap Settings > Wi-Fi.
3
Tap the Wi-Fi® network that you are currently connected to. Detailed network
information is displayed.
To add a Wi-Fi® sleep policy
1
From the Home screen, tap
2
Find and tap Settings > Wi-Fi.
3
Tap , then tap Settings > Keep Wi-Fi on during sleep.
4
Select an option.
WPS
WPS (Wi-Fi® Protected Setup) is a wireless networking standard that helps you establish
secure wireless network connections. If you have little background knowledge of wireless
security, WPS makes it easy for you to set up Wi-Fi Protected Access (WPA) encryption
to secure your network. You can also add new devices to an existing network without
entering long passwords.
Use one of these methods to enable WPS:
•
Push button method – simply push a button on a WPS-supported device, for example, a
router.
•
PIN method – your device creates a random PIN (Personal Identification Number), which
you enter on the WPS-supported device.
To Connect to a Wi-Fi® Network Using a WPS Button
1
From your Home screen, tap
2
Find and tap Settings > Wi-Fi.
3
Turn on Wi-Fi® if it is not already on.
4
Tap > Settings > WPS Push Button, then press the WPS button on the WPS-
supported device.
This is an Internet version of this publication. © Print only for private use.
.
.
.
.
41
Advertisement
Table of Contents
