GENERAL INFORMATION Dear Customer: to the safe disposal of liquids which may contain: chemicals, grease, oil, acid, alka- lines, or other dangerous liquids. Congratulations on the purchase of your new Spinner ® . As you are already 11. Do not leave operating unattended. aware, the scene of the equipment world is becoming more high tech, and we at Mytee Products Inc.
GENERAL INFORMATION FAQs Q – How much PSI do I need to operate the Spinner ® ® require between 500 and 3,000 PSI. Troubleshooting The Spinner is not spinning. ® 1. Inspect the jets to make sure they are not clogged. Hose from the Spinner ®...
Page 4
8903 WAND HANDLE, 1.5” TUBE SPINNER® Attach solution line here. Adapter for use with 2” vacuum hoses. Attach vacuum hose here. 1. Quick disconnect 5. Wand grip handle 2. High-pressure gun 6. Hi-pressure solution hose extractor, connect the Solution Hose to the Male Quick Discon- 7.
Page 5
8903 WAND HANDLE, 1.5” TUBE SPINNER® Part prices are subject to change.
Page 6
8904 “T” HANDLE, 1.5” TUBE SPINNER® Attach solution line here. Adapter for use with 2” vacuum hoses. Attach vacuum hose here. 1. Quick disconnect 5. Hi-pressure solution hose 2. High-pressure gun 6. 12” Spinner® head extractor, connect the Solution Hose to the Male Quick Discon- 7.
Page 7
8904 “T” HANDLE, 1.5” TUBE SPINNER® Part prices are subject to change.
Page 8
8908 COUNTER SPINNER® Connect solution hose here. Connect vacuum hose here. 1. Male quick disconnect 5. 6” Spinner® head 2. Solution hose extractor, connect the Solution Hose to the Male Quick Discon- 3. High-pressure trigger gun 4. Nylon glide port JETS After the extractor is turned on and vacuum is engaged, Use unit on counter top or other hard surface.
Page 9
8908 COUNTER SPINNER® Part prices are subject to change.