Wilton 28806A Manual

Replacement parts
ITEM DESCRIPTION
Stationary Jaw casting # reference
1 Spindle Assembly (includes #1a,1b,2,3)
1a Spindle
1b Tommy Bar, with rubber rings
2 Spindle Retainer with 3 screws and #3
3 Thrust Washer
4 Set of Jaw Inserts with 4 screws
5 Set of Pipe Jaw Inserts with 2 screws
7 Casing Nut with 2 pins
8 Swivel Base Assembly (includes #9,10,11)
9 Lock Nut Assemblies (set of 2)
10 Locking Pads (set of 2)
11 Outer Ring only
To order parts or reach our service department, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model
Number and Serial Number of your tool available when you call will allow us to serve you quickly and accurately. Some parts are shown for
reference only, and may not be available individually.
NOTE: To mount the vise directly to the work surface, the Swivel Base Assembly can be removed. Turn both Lock Nuts counterclockwise to
free the Lock Nuts, Lock Nut Bolts, Inner Ring, and Outer Ring from the rest of the vise. Use appropriate fasteners to mount the vise to the
work surface via the two holes in the bottom of the main vise body.
Specifications
Stock no.
Jaw width
Open capacity, maximum 1
Throat depth
Pipe jaw capacity
Shipping weight
1 based on lead screw engagement with half of nut thread length
WILTON
427 New Sanford Road
LaVergne, Tennessee 37086
Ph.: 800-274-6848
www.wiltontools.com
Stock no. 28806A, Tradesman Vise, Black
Stock no.
28806A
5-1/2 in. (140 mm)
5 in. (127.5 mm)
3-3/4 in. (95.3 mm)
1/4 – 3 in. (6.4 – 76.2 mm)
51.5 lbs. (23 kg)
Note: See reverse side or second sheet for important safety instructions.
28806A
QTY. PART NO.
111813
1 2900150
1 -----
1 2900152
1 -----
1 -----
1 set 2908070
1 set 2904200
1 2900240A-BK
1 2905790-BK
1 set -----
1 -----
1 -----
Copyright © 2020 WILTON, a Division of JPW Industries, Inc.
Part No. M-28806A
Edition 1 03/2020