Summary of Contents for United Technologies Interlogix TruVision TVB-2401
Page 1
All manuals and user guides at all-guides.com TruVision High Definition TVI Bullet Camera Installation Guide TVB-2401, TVB-4401 TVB-2403, TVB-4403 P/N 1072936-EN • REV A • ISS 12MAR15...
Page 2
All manuals and user guides at all-guides.com...
All manuals and user guides at all-guides.com Contents Product overview 1 Camera description 3 Installation 5 Programming 7 Setup menu 9 Specifications 10 Legal and regulatory information 11 Product overview This is the Installation Guide for TruVision High Definition TVI Bullet Camera TVB-2401/TVB-4401 and TVB-2403/TVB-4403.
Page 4
All manuals and user guides at all-guides.com Package contents: Camera with power 3 screws and 3 and video output anchors for wall or cables ceiling installation Template Installation Guide • WEEE and Battery Disposal Installation Guide...
All manuals and user guides at all-guides.com Camera description TVB-2401/TVB-4401 TVI video output Sun shield cable (grey) Lens Power cable IR LED Mounting base output Installation Guide...
Page 6
All manuals and user guides at all-guides.com TVB-2403/TVB-4403 WDR/CVBS switch Mounting base cable Sun shield Power cable Lens TVI video output IR LED cable (grey) CVBS video output cable (black) Note: Please check the camera output settings before setting up a system. The TVI video output can be only connected to a DVR with TVI signal input.
All manuals and user guides at all-guides.com For TVB-2403/TVB-4403, you can connect the white and black line ends of the WDR switch cable to enable the Wide Dynamic Range (WDR) function. The WDR function is disabled by default. If WDR is enabled, the CVBS output will be blocked out, and only TVI output is available.
Page 8
All manuals and user guides at all-guides.com Using a 75-ohm coaxial video cable, connect the camera TVI video output and a TVI DVR, and connect a 12 VDC power supply to the camera power cable. Adjust the camera position and angle as required. 360°...
All manuals and user guides at all-guides.com Programming Programming on TVI output: Programming on TVI output is available for TVB- 2403/TVB-4403 only. Once the camera hardware has been installed, you can configure the camera settings on the TVI DVR. Select PTZ protocol as TruVision Coax and click menu button to call up the camera menu.
Page 10
All manuals and user guides at all-guides.com Programming on CVBS output: Programming on CVBS output is available for TVB- 2403/TVB-4403 only. Programming on CVBS output, you need to connect a monitor and a TVS-C200 controller (purchase separately) as following system figure. CVBS The TVS-C200 has one male BNC output and a female output.
All manuals and user guides at all-guides.com Specifications Power supply 12 VDC Current TVB-2401/TVB-4401: Max.300mA TVB-2403/TVB-4403: Max. 330mA Power TVB-2401/TVB-4401: consumption Max. 3.5 W TVB-2403/TVB-4403: Max.4 W Weight TVB-2401/TVB-4401: 0.64 lb. (291 g) TVB-2403/TVB-4403: 0.68 lb. (309 g) Dimensions 2.76 x 5.89 in. (70 x 149.5 mm) (Ø...
Page 14
All manuals and user guides at all-guides.com harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ACMA compliance Notice! This is a Class A product.
Page 15
All manuals and user guides at all-guides.com...
Page 16
All manuals and user guides at all-guides.com...