Table of Contents
Advertisement
appendix: reference
Stereo audio too noisy
•
Stereo signal is weak. Set Reception: STEREO/SAP/MONO feature to MONO.
•
Press one of the TRACKING up or down buttons to minimize the noise.
Index, Go-To, and Blank Search features do not operate
•
Check to see if MOVIE
Cannot access MOVIE
•
Cassette must have safety tab removed and be recorded in SP speed.
•
Home Recording was selected for the tape type in the menu. Eject cassette and reinsert.
VCR forwards through commercials or momentarily displays a blue screen during playback.
•
Commercial Advance Playback feature is set to AUTO. Set it to MANUAL.
66
COMMERCIAL
ADVANCE feature does not mark commercials when:
•
The Marking feature is set to OFF in the COMMERCIAL ADVANCE menu. Set it to ON.
•
A recording is less than 15 minutes or the commercial is longer than one minute.
•
A single isolated commercial can not be marked.
•
Recording started in the middle of a commercial segment.
•
A commercial group within the first or last two minutes of a recording.
•
Accuracy and effectiveness can vary depending upon program content and the characteristics of the
commercials.
•
A commercial is between 30-and-45 seconds and 45-and-60 seconds.
•
Effectiveness may vary when local television stations insert their own commercials.
Commercials recorded even though COMMERCIAL
66
•
COMMERCIAL
marked commercials during playback.
64
66
ADVANCE feature is activated.
66
ADVANCE feature
ADVANCE is designed to record the commercials, mark them, and then skip over the
66
ADVANCE feature was set to ON.
Advertisement
Table of Contents
