Before Reading This Manual; Installing Batteries - LG Magic Remote MR23GN Owner's Manual

• Magic Remote and Alkaline Batteries (AA)
• Owner's manual
• Press the top of the battery cover, slide it back, and lift the cover as
shown below.
• To replace batteries, open the battery cover, replace alkaline batteries (1.5
V, AA) matching
and close the battery cover. Be sure to point the remote control at the
remote control sensor on the TV.
• To remove the batteries, perform the installation actions in reverse. Don't
mix old or used batteries with new ones. Close the cover securely.
• Failure to match the correct polarities of the battery may cause the
battery to burst or leak, resulting in fire, personal injury, or ambient
pollution.
• Turn on the TV and press the Wheel (OK) on the Magic remote for registration.
• Press and hold the
Magic Remote.
• Press and hold the
disconnect and re-register the Magic Remote at the same time.
2

Before reading this manual

Installing Batteries

and ends to the label inside the compartment,
Register/Unregister the Magic Remote
(Home) button and
(Home) button and
(Back) button together for more than 5 seconds to disconnect the
(Q. Settings) button together for more than 5 seconds to