ELECTRICAL POLE PRUNER
15.2 LEAD SCREW GREASING
•
This operation have to be performed each 3-4 working days to ensure
the tool working life.
•
Use the grease provided within this tool or in any case Lithium Soap
grease NLGI class 2.
•
With the tool connected to the battery, open the blades by pressing the
trigger(1), then switch off the battery and remove the cable (2):
•
Unscrew (3) and remove (4) the bar fixing nut. Unscrew the handgrip
screws (5) and remove the plastic cover (6):
•
Apply the grease on the lead screw (7):
•
Repeat the inverse procedure to reassemble.
73
www.kamikazevolpi.com