ebm-papst DV6224/2PU-235 Operating Manual

ebm-papst DV6224/2PU-235 Operating Manual

Advertisement

Operating manual
DV6224/2PU-235
Product type, manufacturing date (calendar week/year of construction)
and if required, conformity mark can be found on the nameplate on the
product.
Please provide us with the contents of the nameplate when making
enquiries about the product.
ebm-papst St.Georgen GmbH & Co. KG
Hermann-Papst-Straße 1
D - 78112 St.Georgen
Phone: +49 (0) 7724 / 81-0
Fax: +49 (0) 7724 / 81-1309
info2@de.ebmpapst.com
www.ebmpapst.com
As per: 15.08.2012
Version 1 4
Article number: 9695400235
Original operating manual
INDEX
1 SAFETY REGULATIONS AND INFORMATION
2 INTENDED USE
3 TECHNICAL DATA
4 CONNECTION AND COMMISSIONING
5 FAULTS, POSSIBLE CAUSES AND REMEDIES
6 APPROVALS
1
SAFETY REGULATIONS AND INFORMATION
Read the operating manual carefully before commencing work at the
product. Pay attention to the following warnings to avoid risk to
persons or malfunctioning.
This operating manual is an integral part of the product.
In the event of resale or change of ownership the operating manual
must accompany the product. This operating manual may be copied
and provided as information on potential risks and their avoidance.
Hazard classification of warning notices
The following risk ratings are used in this operating manual to denote
potential risk situations and important safety instructions:
Qualification of personnel
Only skilled electricians are permitted to install the product, to carry out
the test run and to work at the electrical unit.
Only instructed and authorized skilled personnel are permitted to
transport, unpack, operate and service the product.
Basic safety regulations
1
Safety risks related to the product must be reassessed after installing
in the final device.
3
The operating manual was developed in accordance with European
market requirements and may need adapting to the market
requirements of the country in question.
3
When working at the product, observe the following:
3
Do not make any changes to the product.
4
4
page 1 of 6
DANGER
This is a potentially dangerous situation
and warns of an impending health risk
or risk of fatal injury if this warning is
not observed. Observe this warning.
WARNING
The dangerous situation can occur and
can result in major or fatal injuries if the
warning is not observed. Work with
extreme care.
CAUTION
The dangerous situation can occur and
can result in minor injuries or damage
to property if the warning is not
observed.
NOTE
A potentially dangerous situation can
occur and results in damage to
property if not avoided.
WARNING
Impermissible high load
Stop the product immediately after
impermissible loading (e.g. impact,
heat, overvoltage).

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DV6224/2PU-235 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ebm-papst DV6224/2PU-235

  • Page 1 WARNING enquiries about the product. The dangerous situation can occur and can result in major or fatal injuries if the ebm-papst St.Georgen GmbH & Co. KG warning is not observed. Work with Hermann-Papst-Straße 1 extreme care. D - 78112 St.Georgen...
  • Page 2 Electrical voltage and current WARNING Rotating fan DANGER Electrical voltage Long hair, loose-fitting garments and jewellery can be caught and pulled into Regularly check the electrical the product. Risk of injury. equipment of the product. Do not wear loose-fitting garments Eliminate immediately loose or jewellery when working on connections and defective cables.
  • Page 3: Intended Use

    NOTE usage at altitudes higher than 2000 meters. Risk of damage to electronic components. Contact ebm-papst if you have specific queries regarding the product. Use ESD protective equipment when mounting. TECHNICAL DATA Drawing, see annex...
  • Page 4: Faults, Possible Causes And Remedies

    CAUTION Connect product Electrical voltage The product is a built-in Check the product for visible damage and the operability of protective component and has no switch for equipment before switching on. disconnecting power. If damage is visible, do not start the product. Only connect the product to current circuits that can be FAULTS, POSSIBLE CAUSES AND REMEDIES...
  • Page 5 - Maintenance instructions as per Art.3; Art.9, Paragraph (3) Usage restrictions for residential areas as per Art.9, Paragraph (4) Accompanying documents as per Annex V, Cl. 3 Within the meaning of Directive 2006/95/EU - use of electrical equipment within specific voltage limits - this document is intended - Instructions for use Art.

Table of Contents