RCA DRD502RB User Manual page 51

The Menu System
4. Use the arrow buttons and MENU•SELECT to select the house
and module codes that match the device's remote module
and label the module. Select Save Setup to complete the
setup.
Device Control
Once the device is set up, there are two ways to control it; with
th emenu system, or with a timer. Select a device from the Home
Control menu screen. You can then, turn it on, turn it off, or
adjust the brightness for lamp modules.
Select Edit Setup to change a device.
Control the device from the menu.
To schedule a timer:
1. Select Set Timer.
2. Schedule a timer by completing the on-screen sentence.
Complete the on-screen sentence to schedule a
timer.
3. Use the arrows and MENU•SELECT to enter an on and off
time.
4. Point to and select Run Timer.
Clear Timer removes all the timer information.
Suspend turns off the timer, but saves the timer information.
On-screen icons are an easy way
to understand the timers.
indicates the timer is set.
indicates the timer is
suspended.
You can schedule several timers to
control the same device at
different times.
49