RCA DCD302RA Owner's Manual page 48

Connections
Connection C
Good Picture and Sound Quality
To use this connection you must have:
• TV with RF input (jack)
• VCR with RF and audio/video inputs
• Coaxial and audio/video cables
To connect TV, VCR, and antenna or cable box.
1. Connect coaxial cables and audio/video cables as shown.
®
To receive DSS
• Tune TV to channel 14 if you receive TV signal off-air.
• Tune TV to channel 65 is you receive TV signal from
cable.
To receive off-air programming (no cable box):
1. Turn off DSS ® receiver and VCR.
2. Tune TV to desired channel.
To receive cable programming (with cable box):
1. Turn off DSS ® receiver and VCR receiver.
2. Tune TV to cable box output channel (usually CH2, CH3,
or CH4).
3. Tune cable box to desired channel.
®
To record DSS programming:
1. Tune TV to the VCR output channel.
2. Tune DSS ® receiver to desired channel.
3. Set VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
2. Turn off DSS ® receiver.
46
programming:
TV
IN
DSS
IN FROM ANT
RECEIVER
OUT TO TV
CABLE
OR
OFF-AIR ANTENNA
VCR
IN FROM ANT
CH3
CH4
OUT TO TV
CAUTION
Do not stack electronic components
or other objects on top of the DSS
receiver. See Safety Information,
inside front cover.
SATELLITE
DISH
VIDEO R L
AUDIO
SATELLITE IN
R L
VIDEO
AUDIO
VIDEO IN AUDIO IN
R L
VIDEO OUT AUDIO OUT
®