Advertisement
BLUETOOTH CONNECTION
ATTENTION
This process only needs to be programmed once. After successfully
programming the headset the unit will automatically connect to the
device when in Bluetooth range and is enabled.
1.
Activate the Bluetooth function on your compatible device.
2.
Press and hold down the multi function button for five seconds.
The status LED will start to flash RED and BLUE alternately.
Search for V80BN in the list of the compatible device and
3.
select connect to device.
The statue LED will start to flash BLUE slowly after a
4.
successful connection.
LED INDICATOR
ANC LED
Illuminates Blue
Flashes Red & Blue
Blinks Blue Slowly
STATUS LED
Illuminates Red
Illuminate Green
6
ANC ON
In pairing mode
Connected to
compatible device
Headset Charging
Headset Charged
CONTROLS
Turn On
On/Off Multi function button
Pairing Mode
On/Off Multi function button
Play / Pause
On/Off Multi function button
/+
Volume UP
- Button
/+
Volume DOWN
- Button
/+
Next Track
- Button
/+
Previous Track
- Button
Accept a Call
On/Off Multi function button
Reject a Call
On/Off Multi function button
End Call
On/Off Multi function button
Turn Off
On/Off Multi function button
Switch ANC On/Off ANC Button
CONTROLS
BUTTONS
ACTION
Press for 3 secs.
Press for 5 secs.
Short Press
Long Press
Long Press
Short Press
Short Press
Short Press
Press for 2 secs.
Short Press
Press for 3 secs.
Press for 2 secs.
7
Advertisement
