Equinox Zodiac Laser
Operation modes
Operation modes:
The Zodiac has four modes of operation as follows:
1, Sound active mode
To select sound active mode set all dipswitches to OFF. You can now use the sensitivity control on
the back panel to set the required sound level.
2, Auto pattern mode
To select auto pattern mode, set dipswitch 1 to the ON position and all others to OFF. The
Zodiac will now cycle through all it's internal geometric patterns.
3, Auto animation mode
To select auto animation pattern mode, set dipswitches 1 + 2 to the ON position and all others to
OFF. The Zodiac will now cycle through all it's internal animation programmes such as a
numbers, running dinosaur and flying bird etc.
4, DMX mode
To select DMX mode, set dipswitch 10 to ON. You can now set the required DMX address using
dipswitches 1 to 9. Please refer to the chart below for DMX functions.
DMX function chart: