Table of Contents
Advertisement
Playing a Tape
Using the Playback Features
Pause, frame advance, picture search, and slow motion work well when you playback tapes
that were recorded using the SP or SLP recording speed.
Pause
Frame Advance
Picture Search
Slow Motion
16
This feature pauses the tape in action and allows you to
examine the details of the scene.
1. Press PAUSE on the remote during playback to pause
the action.
The TV/VCR will automatically switch from pause to
stop after a few minutes to prevent tape wear.
2. Press PAUSE or PLAY to return to playback.
Frame advance lets you view one frame after another.
1. Press PAUSE during playback to pause the action.
2. Press SLOW each time you want to view a frame of
the scene.
Press and hold SLOW to slowly advance frame-by-
frame.
3. Press PAUSE or PLAY to return to playback.
You can visually search a picture during playback.
Sound is turned off during picture search.
1. During playback, press FF to search forward or REW
to search in reverse.
If you start searching within five seconds of a
previous search, the search speed will be slower for
approximately eight seconds.
2. Press PLAY to return to playback.
You can view the picture in slow motion during play.
Sound is turned off during slow-motion playback.
1. Press SLOW during playback to begin slow motion.
2. Use TRACKING up or down to remove any streaks
from the picture.
3. Press SLOW or PLAY to return to playback.
The TV/VCR will automatically switch from slow-
motion playback to stop after a few minutes to
prevent tape wear.
Advertisement
Table of Contents
