SunSetter EasyScreen Owner's Manual

Zipper track & cable-guided

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

OWNER'S MANUAL

Do Not Discard,

Retain for Future Reference

EasyScreen

Zipper Track & Cable-Guided

WARNING

FAILURE TO FOLLOW THESE

INSTRUCTIONS COULD RESULT

IN SERIOUS PERSONAL INJURY,

INCLUDING DEATH

For Technical Support, please visit us at https://support.sunsetter.com,

e-mail at contactus@sunsetter.com or call Toll Free 800-670-7071

Table of Contents

Troubleshooting

Need help?

Do you have a question about the EasyScreen and is the answer not in the manual?

Questions and answers

Summary of Contents for SunSetter EasyScreen

Page 1 Do Not Discard, Retain for Future Reference EasyScreen Zipper Track & Cable-Guided WARNING FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS PERSONAL INJURY, INCLUDING DEATH For Technical Support, please visit us at https://support.sunsetter.com, e-mail at contactus@sunsetter.com or call Toll Free 800-670-7071...
Page 2: Table Of Contents
Adjusting the UPPER and LOWER Stop Position for the EasyScreen . . . . . . . . . . . . . . .
Page 3: Warning
If an enclosed space is formed, the user must comply with any safety warnings related to the use of heating sources (e.g. gas, propane, or wood fire pits) within an enclosed space. If the EasyScreen is installed on a garage door, do not run vehicles, generators, or other gas powered equipment while Screen is fully extended.
Page 4: Easyscreen Zipper Track
EASYSCREEN ZIPPER TRACK Schematic View Figure 1 EASYSCREEN CABLE-GUIDED Schematic View Figure 2...
Page 5: Operating The Easyscreen
If you have ordered a Multi-Channel Remote, it is recommended to use Channel 1 (the first light from the left) of the Remote to control the EasyScreen. Channel 1 of each Remote is unique from Channel 1 of every other Remote.
Page 6: Troubleshooting
TROUBLESHOOTING Problem Solution Once installation is complete, my 1. Use the Remote that came with this EasyScreen. Each EasyScreen will not function. Remote is uniquely different. For details, see pg. 4. 2. For a Multi-Channel Remote, confirm you are on the Channel that has been programmed to the EasyScreen.
Page 7 Motor to stop. To change obstacle detection settings, see Appendix D. 2. Adjust the UPPER or LOWER stop limit on the EasyScreen Motor. See Appendix A, Adjusting the UPPER and LOWER stop position limits of the Motor.
Page 8: Troubleshooting
TROUBLESHOOTING Additional Motor Troubleshooting Problems: Motor does not respond to Remote (Plug/Outlet has power and Remote passes Self Test.) Motor only runs while holding down the UP or DOWN button on the Remote. Solution: 1. Unplug Motor, 2. Wait two seconds, 3.
Page 9: Adjusting The Upper And Lower Stop Position For The Easyscreen
Position Figure 5 To Change the UPPER Stop Position: 1. Move the EasyScreen to its current UPPER (see Figure 4) Button position and let it stop on its own. 2. Press and hold the UP and DOWN buttons (see Figure 7) together, until the Motor jogs or moves.
Page 10: Reset All Communications Between The Motor And Remote Transmitter
13. Make desired adjustments to the LOWER position. 14. Press and hold the MY and UP buttons together; release them when the EasyScreen begins to move up. Let the EasyScreen stop on its own at the UPPER position set in step 11.
Page 11: Add/Delete A Remote Transmitter
EasyScreen, STEP 1, then STEP 2 in using STEP 1, then Figure 11. STEP 2 in Figure 11. Figure 10 Figure 9 Unwanted Channels can be removed from an EasyScreen using STEP 1, then STEP 2 in Figure 11.
Page 12: Obstacle Detection - Change The Level Of Detection Or Deactivate
NOTE: It is recommended all EasyScreens be unplugged from the power source except for the one EasyScreen being programmed. This simplifies the process and reduces errors. STEP 2 STEP 1 Select a Channel to Select a Channel that ADD to, or DELETE...
Page 13: Care And Maintenance
Recasens and SunSetter 1%, 5%, 10% Solar and Privacy Fabrics: To clean the EasyScreen, sponge the fabric with a solution of 1 cup of mild detergent, 1 cup of liquid bleach to 3 gallons of warm water. Protect furnishings, trims, and plant materials that could be damaged or harmed by the soap or bleach.
Page 14 Thank you for choosing SunSetter June 30, 2023 84-9001-00 SunSetter Products, 7549 Graber Rd. Middleton, WI 53562...