Naming The Channels - RCA M21500 User Manual

Using Advanced Features

Naming the Channels

You can name the channels using the character list below. Full appears
beside Label when the memory is used up. Fixed appears beside Label
for channel 00--it cannot be named.
1.
Name a channel
2.
Erase a name
22
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label 12
Channel Memory: 12 Stored
Cable/Air: Cable
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label 12 XET
Channel Memory: 13 Stored
Cable/Air: Cable
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label 12
Channel Memory: 13 Stored
Cable/Air: Cable
Character List
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z &
' ( ) á + , – . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ blank space
A. Press MENU•PROG repeatedly
12
to select the Setup menu. This
menu is white.
B. Press MOVE H (down) to
highlight Label.
C. Press MOVE E to underline the
Clear
channel number.
D. Select the channel number with
the number buttons.
E. Press MOVE E to underline the
first character of the name.
XET 12
F. Choose the character using
MOVE G/H (up or down).
G. Repeat E–F to complete the
name.
H. Press MOVE F to move
ward if you want to change an
Clear
item.
A. Follow A and B above.
12
B. Press MOVE E until clear is
underlined.
C. Press MOVE G/H (up or down)
to clear the name.
Clear
back-