70mai Jump Starter Max User Manual page 20

Notes
1. Please read this manual carefully before using the
device.
2. The device must not be used in place of a car battery.
3. Do not use the device as a toy.
4. To reduce the risk of injury, closely supervise any
children that are around the device.
5. The device is intended for the jump starting of a
12V car battery and should not be used for any other
purposes.
6. Please use the battery clips provided. If the battery
clip or cable is damaged, do not use the device as it may
result in fire, electric shock or other personal injuries.
7. Do connect the positive and negative ends of the
battery directly.
8. Before jump starting the car battery, ensure that the
connections are free of rust and other foreign objects.
Connect the device securely to the battery clips to
prevent the jump start performance from being affected
by poor connection.
9. After the car battery is jump started successfully,
disconnect the device from the car battery within 30
seconds to prevent any damage.
10. Do not use the device for more than 3 consecutive
times. Otherwise, the device may overheat and be
damaged. If multiple jump starts are to be performed,
ensure there is an interval of two minutes between each
jump starts.
11. Do not use the clips to charge any other devices.
12. Do not place the product in an environment where
the temperature exceeds 60℃ .
13. Charging should be done at room temperature of
between 0℃ to 45℃ .
14. Do not expose the device to rain or submerge it in
water.
18