Casio PX-410R Service Manual page 20

9. SWITCH check
1 Press "DSP" button.
2 Press the buttons in the following order.
* Confirmation sound sounds.
* The Button name appears on the LCD.
* A buzzer sounds if buttons are pressed in a wrong order, and "NG" appears on LCD.
* This check cannot be aborted in mid-course.
3 5
4 6
A B C D E F G HI J K L M N O
2
10. BENDER check
1 Press "CHORD MODE" button.
2 "BENDER" Dial
3 "BENDER" Dial
* Confirmation sound sounds.
4 "BENDER" Dial
11. Pedal check (If there is no Pedal, this check can be skipped)
1 Press the "RHYTHM" button.
2 Press the "SOFT" pedal.
* Confirmation sound sounds.
3 Press the "UPPER" button.
4 Press the "DAMPER" pedal.
* Confirmation sound sounds.
5 Press the "RIGHT" button.
6 Press the "DAMPER" pedal.(HALF ON)
* Confirmation sound sounds.
7 Press the "DAMPER" button.
* Confirmation sound sounds.
8 Press the "DOWN" button.
* Confirmation sound sounds.
9 Press the "SOSTENUTE" pedal.
* Confirmation sound sounds.
0 Press the "LEFT" button.
A Press the "SOFT" pedal.(HALF ON)
* Confirmation sound sounds.
7
8
9
0
] ^ a b
"Turn up"
"Turn down"
"Turn center"
c d
m n u
e l o t
h f
k p s
g
j q r
1
i
P Q R
— 18 —
Message on LCD
Button Name
S T
U V W X Y Z [ \
Message on LCD
BEND_CHK
127BEND_CHK
000BEND_CHK
064BEND_CHK
PDLJ_CHK
PDLJ_ON
DMPJ_CHK
DMPJ_ON
DMP3_CHK
DMP3_HLF
DMP3_ON
SOS3_CHK
SOS3_ON
SOF3_CHK
SOF3_ON