Related Manuals for SEAWIN Electricals MP6401
Summary of Contents for SEAWIN Electricals MP6401
- Page 1 KNX/EIB BUS POWER ACTUATORS Product Manual KNX Bus Power Supply Manual-Ver2.1 MP6401...
- Page 2 KNX/EIB BUS POWER ACTUATORS Product Manual Catalog 1 Overview ..........................................1 2 Detailed parameters ......................................1 3 Dimensional drawings and wiring diagrams ............................. 2 4 Product Operating Instructions ..................................2 5 Power running test ......................................3 6 Safe use and maintenance ....................................3 7 Contact ...........................................
- Page 3 KNX/EIB BUS POWER ACTUATORS Product Manual Overview The EIB / KNX bus power supply is used to provide and monitor the voltage of the EIB / KNX system. The output has two terminals, including one KNX bus output for EIB bus power supply and signal transmission. One 30V DC auxiliary output and provides a power supply voltage of 30V DC, 500mA which can be sent to the terminal;...
- Page 4 KNX/EIB BUS POWER ACTUATORS Product Manual Dimensional drawing and wiring diagrams Dimensional drawing wiring diagram Product Operating Instructions ①Description: 200~240VAC power supply wiring port, the aperture can be connected to φ4 wire; ②Description: Auxiliary power supply 30V DC output wiring port, the aperture can be connected to φ4 wire; ③Description: KNX bus power supply output port, KNX bus access, red line connected to "+", black line connected to "-";...
- Page 5 KNX/EIB BUS POWER ACTUATORS Product Manual Power running test After the bus power is properly installed, turn on the main power and supply power to the bus. At this time, the status (KNX BUS) and Status (Auxiliary) indicators on the device are on, and the other lights are off, indicating that the bus power can operate normally.
Need help?
Do you have a question about the MP6401 and is the answer not in the manual?
Questions and answers