Chapter 4: Using The Tv's Menu System; Sound Menu - RCA Scenium HDLP50W151 User Manual

Using the TV's Menu System
22

Sound Menu

Sound settings Displays a choice list that lets you adjust the TV's speakers and subwoofer.
Left & Right balance Use the left or right arrow to center the bar under the arrow to
balance the left and right speakers.
Amplifier Use the left or right arrow to select External (if your TV is using external
amplifier only) or Internal (if your TV is using the speakers in the TV).
Subwoofer Set the subwoofer to External, if the TV is using an external subwoofer; or None.
Sound type Press the right arrow to scroll through the available audio types, which control the
way the sound comes through your speakers.
Mono Plays the sound in mono only. Use this setting when receiving broadcasts with weak
stereo signals.
Stereo Splits the incoming stereo audio signal into left and right channels. Most TV
programs and recorded materials have stereo audio. The word Stereo appears on the TV when
you tune to a program that is broadcast in stereo.
Automatic Chooses the sound type according to the current signal.
Sound Mode Press the right arrow to scroll through the available audio modes, which provides
special processing through your speakers and depends on how you set the sound type.
Normal Does not give any special processing, simply provides mono or stereo sound.
Wide Available only for mono signals. "Widens" sound from mono broadcasts and mono
components connected to your TV for a fuller, more spacious sound.
Magic Available only for stereo signals. Gives a surround effect with more bass.
Dolby Virtual Available only for stereo signals. Creates a virtualized surround sound
experience from two speakers using the Dolby Pro Logic decoding. It provides the sensation
of being surrounded by additional speakers.
Surround effect Controls the amount of surround sound in Dolby Virtual sound mode.
Second Audio Program (SAP) Plays the program's audio in a second language, if one is
available. The TV displays the word SAP when you tune to a program that is broadcast with SAP
information. SAP audio is broadcast in mono. SAP is also used to broadcast a program's audio
with descriptions of the video for the visually impaired.
Automatic sound level Reduces the annoying blasts in volume during commercial breaks, and
also amplifies softer sounds in program material. Eliminates the need to constantly adjust
volume control.
Headphone settings Displays a choice list of available settings you can adjust: Volume, Bass
and Treble. The Headphone sound option allows you to choose stereo, mono or automatic. These
descriptions are same as sound type above.
Graphic equalizer Allows you to choose a specific sound through the Sound Preset option.
Press the right arrow to cycle through the options: Standard, Movie, Voice, Music, Flat,
Videogame, Video camera and Personal.
The Frequency range displays the different treble and bass bands set for each Sound Preset
option. You can choose a band and make adjustments. When you make adjustments, the Sound
Preset option automatically changes to Personal. Press the left or right arrow button to select
the frequency (Bass 100Hz, Mid Bass 500Hz, Medium 1.5kHz, Mid Treble 5kHz, Treble 10kHz) you
want to adjust. Then use the up or down arrow button to adjust the decibel.
To view the frequency range of another Sound Preset option, press the right arrow until no band
is selected and Frequency range is highlighted. Then press the up arrow to highlight Sound
Preset.
Graphics contained within this publication are for representation only. Chapter 4