Table of Contents
Advertisement
Preparation
Either open the flash by pressing [ ] (Flash open) button, or attach a flash (optional) to this unit.
1
Set the wireless flash to RC mode and position the flash
• Select the channel and group of the wireless flash.
2
Set the menu
→
[Wireless]
[Wireless Channel]
[Wireless Setup]
3
Use
to select the item and press [MENU/SET]
Firing Mode
Flash output
Flash ratio
• Press the [DISP.] button to perform a test firing.
149
(→43)
[Rec] → [Flash]
Set [Wireless] to [ON]. [WL] will appear with the flash icon on the
recording screen.
Select the channel you have set for the wireless flash in step
Proceed to step
Taking Pictures with Wireless Flashes
3
.
Stabiliser, Zoom and Flash
1
.
DVQP1377
Advertisement
Table of Contents
