Summary of Contents for Parker Research Corp B200S
Page 1
The B200 is for use on 115 VAC 60 Hz, single phase grounded power source. Using an approved GFCI is recommended. The B200S is for use on 230 VAC 50-60 Hz, single phase grounded power source. The B200S is sold without a power cord plug. Only locally approved plugs should be used and installed by certified personnel.
Page 2
GENERAL SAFETY RULES Please read all instructions. Failure to follow all instructions listed below may result in injury. If the equipment is used in a manner other than as specified in these operating instructions, the protection provided by the equipment may be impaired. Always wear eye protection DO NOT OPERATE unit from a DC power source.
Page 3
CAUTION: For the correct and safe use of this equipment, training of operating personnel is required. Use of proper inspection procedures, standards compliance and safety requirements is the obligation of the user. ALWAYS WEAR SAFETY GLASSES WHEN USING THIS EQUIPMENT PARKER RESEARCH CORP. 2642 ENTERPRISE ROAD WEST CLEARWATER, FL 33763...