Download
Share
Print this page
  1. Manuals
  2. Brands
  3. M1 Manuals
  4. Camera Accessories
  5. MIPI-CSI
  6. Quick start manual

M1 MIPI-CSI Quick Start Manual

Camera kit
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
2023/06/12 22:03
M1 MIPI-CSI Camera Kit
The M1 MIPI-CSI Camera Kit is the day and night camera.
You can get the best imaging whatever it is in the daytime or at night thanks to the automatically
switchable IR-Cut filter.
It's a built-in IR-cut camera, can be used during the day and night.
Features
ODROID Wiki - https://wiki.odroid.com/
1/7
M1 MIPI-CSI Camera Kit

Advertisement

loading

Summary of Contents for M1 MIPI-CSI

  • Page 1 M1 MIPI-CSI Camera Kit M1 MIPI-CSI Camera Kit The M1 MIPI-CSI Camera Kit is the day and night camera. You can get the best imaging whatever it is in the daytime or at night thanks to the automatically switchable IR-Cut filter.

  • Page 2: Specification

    This can avoid image color cast, which is easier for beginners to use. MIPI CSI interface - This ODROID-M1 camera module uses the dedicated CSI interface, via the CSI bus, a higher bandwidth Link which carries 5 megapixels data from the camera back to the processor.

  • Page 3: Ir-Cut Filter

    The lighting condition is poor, so the IR illumination should be turned on and the IR filter switched off. M1 MIPI-CSI Camera Kit day-night vision cameras use photoresistors to automate the IR switching. This is the default option and no extra settings are required.

  • Page 4: Package Included

    Last update: 2022/05/09 15:42 accessory:camera:ov5647 https://wiki.odroid.com/accessory/camera/ov5647?rev=1652078541 First, remove the IR-Cut filter to hardware work. you can unscrew two screws from behind of the OV5647 module. then please remove the photoresistor and weld a 0ohm resistor. please check the above picture. After works, please re attach the IR-Cut Filter.
  • Page 5 2023/06/12 22:03 M1 MIPI-CSI Camera Kit F|G. 1 x Acrylic Holder H|I|J. 1 set x Screws, Nuts, and Spacers for standing up the camera on the holder. ODROID Wiki - https://wiki.odroid.com/...

  • Page 6: How To Connect

    Caution : Make sure your ODROID-M1 unplugging power while installing & removing the OV5647 MIPI Camera from the ODROID. If you install and remove the camera until ODROID-M1 on, you can fry your OV5647 MIPI Camera. Connect your OV5647 MIPI Camera to the CSI port on the ODROID.
  • Page 7 2023/06/12 22:03 M1 MIPI-CSI Camera Kit Slide the ribbon cable of the camera into the CSI port with blue side facing the Ethernet or HDMI port. Make sure your cable slide in correct. if the cable is not fit into the port, you can fry your camera.