Table of Contents
Advertisement
Connections & Setup
Explanation of Jacks
This section describes the jacks you can use to make connections. There are several ways to connect components to
your TV.
L/
MONO
DVI-HDTV
P
P
Y
B
R
P
P
Y
B
R
COMPONENT INPUTS
COMPOSITE INPUTS
V
L/
MONO
V
L/
MONO
AUDIO/VIDEO OUTPUT
FIXED AUDIO
V
L
VARIABLE
AUDIO
SUBWOOFER
L
+
+
RIGHT
LEFT
EXTERNAL SPEAKERS
10
DVI-HDTV Input Lets you connect an HD receiver with a DVI output.
• DVI (Digital Visual Interface) Provides an uncompressed, digital video interface developed for
high-bandwidth digital connection. It supports the overlay of high-resolution graphics needed
by some electronic program guide navigation and other interactive services. DVI, when
combined with HDCP (High bandwidth Digital Content Protection) technology, creates a
protected digital connection. The signal speed of the DVI connection is 1080i for HDTV at a rate
R
of 1.78 Gigabits per second.
• L/MONO (Audio) Provides left audio connection when using the DVI jack. The left audio
connector is usually white.
• R (Audio) Provides right audio connection when using the DVI jack. The right audio connector
is usually red.
Note: Remember to connect the left and right audio cables because the DVI cable carries only the picture signal,
not the sound.
COMPONENT INPUTS Lets you connect a component video source, such as a DVD player.
L/
MONO
R
• CMP1 Y, P
separated into three signals. Use three video-grade cables for the connection. When using CMP1
Y, P
B
Input jacks.
• CMP1 L/MONO (Audio) Provides left audio connection. The left audio connector is usually
L/
R
MONO
white.
• CMP1 R (Audio) Provides right audio connection. The right audio connector is usually red.
• CMP2 Y, P
source. Their description is the same as CMP1 above. When using CMP2 Y, P
connect the left and right audio cables to the CMP2 Audio jacks.
COMPOSITE INPUTS Lets you connect another component such as a VCR, DVD player, or laserdisc
player. Its AUDIO jacks are the same as described for CMP1 above.
R
• VID1 S-VIDEO Provides better picture quality than the video jacks (VID1 and 2 Video) because
the color part of the signal is separated from the black and white part of the picture. When
using VID1 S-VIDEO, make sure to connect left and right audio cables to the VID1 L/MONO and
R Audio Input jacks.
• VID1 V (Video) Provides composite video connection. The video connector is usually yellow.
R
• VID2 S-VIDEO, V and L/MONO and R Audio Allows you to connect a component such as a
VCR, DVD player, or laserdisc player. Their description is the same as VID1 above.
Note: Do not connect an S-Video and Video cable at the same time in either VID1 or VID2 jacks.
AUDIO/VIDEO OUTPUTS Lets you connect an amplifier or audio receiver for improved sound
quality or an external video monitor.
• FIXED AUDIO L/R Provides fixed-level audio output from the TV. This audio output is ideal for
R
connecting to an A/V receiver when you want to control the volume through the A/V receiver.
• VARIABLE AUDIO Provides variable-level audio output. Volume levels are controlled by the
volume controls on the TV and remote control.
• SUBWOOFER Provides lower bass audio frequencies out from the TV and to a subwoofer.
R
Note: If you've connected a subwoofer, make sure you set the Subwoofer option in the Sound menu to External. Go
to page 22 for instructions.
EXTERNAL SPEAKERS
• Right and Left Speaker Terminals Let you connect external left and right speakers to the TV
to receive left and right sound.
• EXT/INT (switch) Lets you turn the TV's internal speakers on or off. EXT sends audio to
external speakers only. INT sends audio to the TV's internal speakers only.
EXT/INT
ANTENNA/CABLE Lets you connect a coaxial cable to receive the signal from the antenna, cable,
cable box, or if using the examples on pages 6-8, a VCR.
Graphics contained within this publication are for representation only.
, P
(Component Video) Provides optimum picture quality because the video is
B
R
, P
, make sure to connect left and right audio cables to the CMP1 L/MONO and R Audio
R
, P
, and L/MONO and R Audio Allows you to connect a second component video
B
R
, P
, make sure you
B
R
Chapter 1
Advertisement
Table of Contents
