Philips HTS3355 Quick Start Manual page 2

1 Connect
A Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A
Place the center speaker above or close to the TV.
B
Place the subwoofer on the floor, at least one meter
away from the TV.
C
Place the front speakers at equal distances from the
TV.
D
Place the rear speakers at normal listening ear level.
B Connect the main unit to TV
Television
( rear)
VIDEO IN
(CVBS)
VIDEO IN
(CVBS)
HDMI OUT
DOCK
VIDEO OUT
Pr Y
Main Unit
(rear)
Pb
S-VIDEO COAXIAL
Connect a composite video cable (supplied) from the
CVBS jack on main unit to the VIDEO IN jack on
your TV.
If your TV supports HDMI, connect the HDMI cable
(supplied) from the HDMI OUT to the HDMI IN
jack on your TV.
Note It is important to connect the main unit
directly to your TV.
C
Connect the speakers and
subwoofer
Connect the various colored plugs from the speakers
and subwoofer to the same colored jacks at the rear of
the main unit.
FRONT CENTER
SUBWOOFER
REAR REAR
FRONT RIGHT LEFT
LEFT
FRONT
RIGHT
Main Unit (rear)
D
Connect the radio antennas
Keep the antennas away from the electronic devices to
prevent unwanted interference.
FM antenna
A
Main Unit (rear)
B
AM/MW antenna
A
Connect the FM antenna to the inner pin of the
FM 75 jack. For optimum reception, extend the
wire and fix its end to the wall.
B
Unfold the AM/MW loop antenna and fix the claw
into the slot. Push the tabs and insert the wires into
the AM/MW jacks.
C
Connect the power cable from the main unit to the
AC power outlet.
E
Connect audio output from TV
(optional)
To hear the TV audio through this home theater system,
use a red and white audio cables (not supplied) to
connect the AUDIO IN-TV jacks on the main unit to the
AUDIO OUT jacks on your TV.
AUDIO
OUT
Television
AUDIO OUT ( rear)
AUDIO
OUT
AUDIO IN
Main Unit (rear)
Note When watching the TV programs, you can
press TV on the remote control to get the sound
output from the speakers.
2 Set up
A
Finding the viewing channel
A Press 2 (STANDBY ON) on the main unit to turn
it on.
B
Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
STANDBY-ON
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
°
control repeatedly (or AV, SELECT, button) until
you see the Video In channel.
B Select the display language on the
screen
A
Press SETUP.
The { General Setup Page } appears.
General Setup Page
Disc Lock English
Display Dim Port. do Brasil
Program Espanõl
OSD Language
Screen Saver
Sleep
DivX(R) VOD Code
SETUP
B
Press to select { OSD Language } and press .
C
Use keys to select a language option in the
menu and press OK to confirm.
D
Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theater system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this Home Theater
System. Refer to the user manual for more information.