Philips HTS3450 Quick Start Manual

1 Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
D
C A
C
B
D
A
Place the centre speaker above or close to the TV.
B
Place the subwoofer on the floor, at least one metre
away from the TV.
C
Place the front speakers at equal disctances from the
TV.
D
Place the rear speakers at normal listening ear level.
B
Connect the radio antennas
Keep the antennas away from the electronic devices to
prevent unwanted interference.
12 mm
C
B
L
R
A
DVD System (rear)
A
Connect the FM antenna to the FM socket. Extend
the wire and fix its end to the wall.
B
Unfold the AM/MW loop antenna and fix the claw
into the slot.
C
Push the tabs and insert the wires into the AM/MW
sockets.
C Connect the speakers to AV
subwoofer
Connect the various coloured plugs from the speakers to
the same coloured sockets at the rear of the AV
subwoofer.
CENTER
FRONT FRONT
LEFT
RIGHT
REAR
REAR
LEFT
RIGHT
AV subwoofer (rear)
D Connect the AV subwoofer to DVD
system
Use the supplied inter-connect cable to connect TO AV
SUBWOOFER socket and TO DVD SYSTEM socket.
Tighten the screws at the sides to secure the connection.
AV subwoofer (rear)
L
MW
R
HDMI OUT
DVD System (rear)
E Connect the DVD system to TV
Television ( rear)
VIDEO IN
(CVBS)
VIDEO IN
(CVBS)
To off-air
antenna or
set-top box
~ L
MW
MAINS Pb
MW
R
HDMI OUT
DVD System (rear)
r Y
Pb
A
Use the supplied composite video cable to connect
the CVBS socket on this DVD system to the VIDEO
IN socket on your TV.
B
Plug in the power cables from the DVD system, AV
subwoofer and TV to the AC power outlets.
Note It is important to connect the DVD system
directly to your TV.
F
Connect the audio from TV to DVD
system (optional)
To hear the TV audio through this home theatre system,
use the red and white audio cables (not supplied) to
connect the TV IN (R/L) sockets on this DVD system to
the AUDIO output sockets on your TV.
Television ( rear)
AUDIO
OUT
AUDIO OUT
AUDIO
OUT
AUDIO IN
b
L
MW
MW
R
DVD System (rear)
Note Press TV on the remote control to get the
sound output from the speakers system when watching
the TV programme.
Set up
2
A
Finding the viewing channel
A
Press STANDBY ON on the DVD system.
B
Press SOURCE on the DVD system until "DISC"
appears on the display panel.
C
Turn on the TV. Use the TV's remote control to
select the correct viewing channel for the DVD
system.
You should see the blue DVD background on the
TV.
Note To search for the correct viewing channel,
press the Channel Down button on the TV's remote
°
control repeatedly (or AV, SELECT, button) until
you see the blue DVD background.
B Select the display language on the
screen
A
Press SETUP.
The { General Setup Page } appears.
General Setup Page
Disc Lock
Display Dim
Program
OSD Language English
Screen Saver Espanõl
Brazil Por
DivX(R) VOD Code
B
Press to select { OSD Language } and press .
C
Use keys to select a language in the menu and
press OK to confirm.
D
Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this DVD
system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this DVD system.
Refer to the user manual for more information.