Table of Contents
Advertisement
Electrical specifications
Model
Video input signals
AC input voltage/
frequency/current
Inrush current
Power consumption
As defined in EU 2019/2021 and EU 2019/2013.
1
Max brightness and contrast setting with maximum.
2
Pon: Power consumption of On Mode measured with reference to Energy Star
3
test method.
TEC: Total energy consumption in kWh measured with reference to Energy Star
test method.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
│
18
About your monitor
S3222HS
HDMI 1.4 (HDCP), 600 mV for each differential line,
100 ohm input impedance per differential pair
100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.6 A
(max.)
120 V: 30 A (max.) at 0°C (cold start)
240 V: 60 A (max.) at 0°C (cold start)
0.3 W (Off mode)
0.3 W (Standby Mode)
26 W (On Mode)
1
52 W (Max.)
2
25 W (Pon)
3
78.36 kWh (TEC)
3
1
1
Advertisement
Table of Contents
