Table of Contents
Advertisement
DESCRIPTION
KNOW YOUR CHAIN SAW
NOTE: Before attempting to use this product, familiarize yourself with all
operating features and safety rules.
Your Chain Saw has a precision built electric motor and it should only be connected
to a 120-volt, 60 Hz AC ONLY power supply (normal household current). The electric
Chain Saw should always be used with a GFCI (Ground Fault Circuit Interrupter) outlet.
DO NOT operate this Chain Saw on direct current (DC). The large voltage drop would cause
a loss of power and the motor would overheat.
If the Chain Saw does not operate when plugged into correct 120-volt, 60 Hz AC ONLY outlet,
check the power supply. The Chain Saw comes with an electric plug and should be plugged
into a proper extension cord (See page 6).
CHAIN SAW FEATURES:
TECHNICAL DATA:
• Power: 15 Amp motor
• Voltage: 120V
• Bar length: 18"
• Rated power: 15 Amp
• Chain brake – Auto and manual
• Bar length: 18"
• Automatic lubrication system
• Chain speed: 12m/s
• 2 in 1 Tool-less chain tension
• Oil tank capacity: 200ml
and blade change with over
• Chain pitch: 3/8"
tensioning protection
• Number of chain links: 63
• Large oil tank with visible gauge
• Chain gauge: 0.05"
• Extra chain
• Saw chain type: E&S, ES 91VG63E
• Front metal bumper
• Weight 11.68 LBS
Extra chain: E&S, ES 91VG63E
(when filled with oil)
• Bar type: E&S, ES180SDEA041
Oregon
• Weight
(chain & bar included)
• Protection class:
CHAIN SAW CALL- OUTS (See Figures 2 and 3 on page 15)
1. Rear handle (See Fig. 2)
2. On/Off switch (See Fig. 2)
3. Lock-off button (See Fig. 2)
4. Oil filler cap (See Fig. 2)
5. Front handle (See Fig. 2)
6. Activation lever for kickback brake (front Hand Guard) (See Fig. 2)
7. Chain Guide bar (See Fig. 2)
8. Chain (See Fig. 2)
9. Spiked bumper (See Fig. 2)
10. Plastic Chain/Bar/Blade protection cover (See Fig. 2)
11. Locking knob/ Chain tensioning adjustment knob (See Fig. 2)
12. Cover plate (See Fig. 2)
13. Drive sprocket (See Fig. 3)
14. Guide fins for chain bar (See Fig. 3)
15. Symbol for rotation and cutting direction (See Fig. 3)
16. Chain tensioning catch (See Fig. 3)
17. Chain catcher (See Fig. 3)
18. Fastening bolt (See Fig. 3)
19. Oil level gauge (See Fig. 3)
14
DESCRIPTION cont.
KNOW YOUR CHAIN SAW cont.
CHAIN SAW CALL- OUTS cont. (Figures 2 and 3)
Fig 2.
Oregon
®
, 18" (91PX063X)
®
, 18" (180SDEA041)
: 10.5 lbs
/ II
Fig 3.
Cover Plate
Chain Rotation
15
Advertisement
Table of Contents
