Base Unit - RCA D940 Owner's Manual

DBS_D940_IB.QXD 11/5/01
Base Unit Set-Up
Where to Use.
Use in the room where the DBS
Receiver is located.
How to Set-Up
1. Plug the Base Unit power cord into standard
electrical outlet.
2. Point the front of the Unit (logo side) facing
the DBS Receiver. Extend the antenna
for best performance.
3. Check the following distances
• Base Unit is within 20 ft. of DBS Receiver.
• Base Unit is within 100 ft. of Extension Unit.
DBS
DISH
ANTENNA
DBS Receiver
After setting up your Extension and Base Units, operate the Signal
Sender by aiming your remote at the RCA logo on the front of the
Extension Unit.
6
10:27 AM Page 6

Base Unit