Monster TULPAR T7 V22.1 User Manual page 8

I/O Port
DC-In x1
USB USB Type A @Right side x2: USB 3.1 (Gen1) X2
(Power off mode support USB power, but w/o bc1.2 protocol )
USB Type A @Left side x1: USB 3,1 (Gen2) X1
(Power off mode support USB power, but w/o bc1.2 protocol )
USB Type C x1 @Rear side x1: USB 3.1 Gen2 + DP
(Power off mode support USB power, but w/o bc1.2 protocol )
HDMI 2.1 x1
Audio out & Mic in x2
Card reader x 1 USB3 interface, SD/SDHC/SDXC, UHS-I speed Connecter:
Full SD size
Audio
Audio Codec Audio Codec Realtek ALC274CG / Codec: Realtek
ALC1306-CGT
*Azalia standard support *D3 mode support
*Smart AMP support
Speaker/MIC *Build-in 2 speakers *Speaker: 2W/each
*Digitial Microphone support
Input
Keyboard Membrane KB 340*109.2*3.6mm
Single zone RGB Backlight Support
Pointing Device TDB5297 Outline: 154*100* 0.6 mm AA: 150*94.6 mm Mylar
Enable/Disable area :10mmx10mm Palm Rejection:Support
Communication Port
Lan *RTL8125BG Supports 10/100/1000/2500 Mb/sec *PCI-E interface
*Power Down Mode D1~D3 support *PCIe ASPM L1.1, L1.2 support
*UI for network package management
Wireless Lan *M.2 2230 w/ CNVI interface (Intel WiFi6 AX201)
IEEE802.11 a/b/g/n/ac/ax support
Power
AC Adapter Automatics Voltage adjustment between 100 and 240VAC 50/60Hz,
230 Watts (19.5V/11.8A), 3 Pins
Battery Li- polymer Battery, SW Gas Gauge IC, soft pack,
4 cells (4s1p 4100mAh) 62.32wh
CAUTION:
Please use the match adapter basing on the rating of BIOS, to avoid
NOTE
overheat and abnormal of adapter.
MODEL IS DESIGNED TO USE WITH THE
DC INPUT: 230 Watts , (19.5V/11.8A)
EN
07