Operations
Control panel
01 Cycle Selector
02 Display
03 Temp.
04 Spin
05 Delay End
06 Start/Pause
07 Power
*(3 sec) : Press and hold for 3 seconds.
WW3000TM_FA_8C104-000708_EN.indd 37
WW3000TM_FA_8C104-000708_EN.indd 37
Turn the dial to select a cycle.
The display shows current cycle information and estimated time remaining, or
an information code when a problem occurs.
Press to change the water temperature for the current cycle.
Available temperature range depends on the cycle. The selected temperature
will be displayed on the display.
Press to change the spinning speed for the current cycle.
Available spin speed depends on the cycle. The selected spin speed will be
displayed on the display.
Press Delay End
repeatedly to cycle through the available Delay End
options (from 3 to 24 hours in one hour increments).
Press to start or pause operation.
Press the button once to start a cycle.
To pause operation, press the button again. You may change the cycle settings
and options.
To resume paused operation, press the button again.
Press to turn on or off the washing machine.
If you turn on the washing machine and do not use it for 10 minutes, it will
turn off automatically.
English 37
2021-04-07
2021-04-07
4:05:41
4:05:41