Advertisement
BOOM MIC - OPEN MIC/PTT
HEADSET
User's Manual
SPECIFICATIONS
Bluetooth Protocol
Version 5.0
Noise Cancellation
CVC 8.0
Range
5 Meters
2.4~2.48 GHz
Freqency Band
Unlicensed ISM Band
Talking Time
Up to 6 Hours
Standby Time
Up to 300 Hours
Weight
18 g
Battery
Li-ion Battery
3.7 V/ 90 mAh
Charging
5~6 VDC/400 mA
Charging Time
Up to 1.5 Hour
DIAGRAM
Power Switch
Vol +/- Button
Mute Button
PTT Button
MIC1
MIC2
Light
Charging Port
(USB C)
Vol+, SHORT click for volume increase
Vol -, SHORT click for volume decrease
MIC1 is for voice.
MIC2 is for noise cancellation.
Mute Button is not used.
2
SWIVEL TO ADJUST
270°
180°
Adaptable to
either ear
3
OPEN-MIC/PTT
This headset can be either open MIC or PTT
(push to talk) depending on the setting of the
radio that it pairs with.
(Refer to "Yapalong-6000 User's Manual")
If the radio is in PTT mode, the user needs to
push the PTT button to talk.
If the radio is in open MIC mode, the user
can talk directly without pushing the button.
CHARGING
Light Indications:
- Solid Red, charging
- Solid Blue, charging is complete
- Flashing Red, battery is low
(With 2 "beeps" every 5 seconds)
Notes:
- Please charge your Bluetooth headset
FULLY if it is used for the first time.
- Charge once a month if the headset is not
used often for longer battery life.
4
Advertisement
Table of Contents
Related Manuals for Yapalong BOOM MIC
Summary of Contents for Yapalong BOOM MIC
- Page 1 OPEN-MIC/PTT This headset can be either open MIC or PTT Power Switch (push to talk) depending on the setting of the BOOM MIC - OPEN MIC/PTT radio that it pairs with. Vol +/- Button HEADSET (Refer to “Yapalong-6000 User’s Manual”) User’s Manual...
- Page 2 PAIRING WITH YAPALONG PAIRING WITH YAPALONG (Cont’d) WEAR USE WITH CELLPHONE During pairing, make sure the headset is in This headset transmits low-power Bluetooth Pairing Note: before starting, please turn off all the pairing mode: it reports, “Pairing…”, and its 1.Power on the headset.
Need help?
Do you have a question about the BOOM MIC and is the answer not in the manual?
Questions and answers