Heat Exchanger - Whirlpool AWZ 9811 Quick Reference Manual

HEAT EXCHANGER

Before cleaning or carrying out
maintenance, switch off the dryer.
Clean the heat exchanger at least
every three months, proceeding as
follows:
A. Open the door and press the heat
exchanger flap button on the
bottom of the door entrance.
B. The heat exchanger flap opens.
C. Fold the heat exchanger handle
upwards to the horizontal position
and remove the heat exchanger.
D. Clean the heat exchanger under
running water by turning it around
to reach all sides.
E. Wipe away dust and lint from the
seals and the heat exchanger.
F. Remove the lint in the heat
exchanger housing. Keep the
drainage hole (left side in front in
the housing) free from lint.
G. Replace the heat exchanger in its
housing (TOP or HAUT mark
upwards) and press the handle.
H. Close the flap.
The heat exchanger aluminium plates
may become discoloured over time.
42
A
D
B
C