Page 2
Die Deutche Bedienungsanweisungen dieses Handbuchs beginnen auf Seite 21. NOUS VOUS REMERCIONS d’avoir choisi le purificateur d’eau RO 300, qui remplira son office sans faillir pendant de nombreuses années. Pour obtenir les performances optimum de votre purificateur d’eau, il est recommandé de lire attentivement le présent document et de le conserver en lieu sûr à...
Contents For the user For the installer Safety information Technical facts - Installation Installation 16-19 - Child safety - Unpacking - Use - Positioning the water purifier - Waste management - Installing the pure water faucet Information - Water connection - Consumables - Electrical connection - Extra accessories...
Safety information Carefully read the user instructions, which contain directions, advice and warnings, before installing and starting to use the water purifier. It will then work in a correct manner and provide the greatest benefit. Everybody using the water purifier should be familiar with how to operate it and its safety features. The user manual should be kept and stay with the water purifier if it is ever moved or changes owners, the user of the appliance should be able to read about the various functions and safety instructions.
Safety information Waste management Old apparatus At the end of the water purifier’s life, disconnect the plug Packaging from the electrical supply and cut the cable at the point 80% of the components used in the appliance where it enters the appliance. Make sure that children do and its packaging are identified with symbols to not play with the left cable.
Product description CONTROL PANEL FILTER SERVICE Bracket for reject water hose Connection to the indicator light on the faucet Reject water hose Pure water faucet Feed water hose Indicator light Hose clip 10 Button Angle bracket for pure water hose 11 Adapter for feed water hose Pure water hose 12 Filter spanner...
Using the water purifier When the water purifier has been installed and flushed according to the instructions, it is ready to be used. The water purifier has an electronic control system which makes it easy to use. Remember the following: Change the filter when filter replacement is indicated on the control panel (2 - 3 times/year).
Maintenance Replacing the filter Remove the old filter. It is important to pay attention to filter replacement, as Wipe up any spillage on the base plate. the filter’s primary job is to protect the membrane. Check Clean the filter container with a brush and that the container is not leaking after filter replacement, water.
Maintenance Descaling When the flow is reduced, the water purifier should be descaled to extend its lifetime. When the flow cannot be restored despite descaling and filter replacement, contact your dealer. During the descaling procedure, which takes around 10 hours, the water purifier cannot be used. The descaling product can be ordered from your dealer, see «Consumables».
Maintenance Disinfection If the feed water has a high content of micro-organisms, the water might develop an odour if the water purifier is not used for an extended period of time (1 week). It is then necessary to disinfect it. After the disinfection the filter has to be changed.
Maintenance Storage The water purifier should be put into storage if: it is going to be disconnected from water and electricity for an extended period (1 week or more). it is not going to be used to produce purified water for a period of 4 months or longer.
Maintenance Cleaning the grid The grid blocks larger particles and is situated in the feed water connection. If the flow is reduced or the purifier makes a noise, the grid may be blocked. Check that the water purifier is in standby mode.
If the water purifier is not working Trouble-shooting table To protect the user and the water purifier from incorrect use, there are built-in alarms which cause the purifier to give an indication and stop. The table below gives probable extinguished flashing causes of warnings given by the water purifier.
Service Service and spare parts Before calling service, use the trouble shooting table «If the water purifier is not working» to try to attend to the fault yourself. If service is called in to solve a problem that is in this list, there is a risk that you will be responsible for the cost.
Technical facts Dimensions: operating cycle 2 hours -height 462 mm noise level when installing -depth 365 mm in undersink cupboard <60 dB(A) -depth with hoses 390 mm Water efficiency -width 150 mm - during operation approx. 65 % -weight (on delivery) 15 kg - including flushing approx.
Installation Unpacking If the appliance has been damaged during transportation, you should immediately notify the company responsible for delivering it. Carefully lift out the water purifier by taking hold of the plastic bag and the rear handgrip. The appliance can be damaged if it is lifted in any other way.
Installation Water connection Feed connection: The water purifier is connected to cold water (2 - 40 °C) via the feed water hose. The connection should be supplied with an easily accessible shut-off valve, see fig. D. If the connection is with new pipes or pipes that have not been in use for an extended period, the water should be allowed to run for a while before the hose is connected in order to flush out sand and rust.
Installation Connecting the water purifier Before the water purifier is placed in its intended position, remove the plug at the end of the reject water hose and the two plugs in the connections on the purifier, see fig. F. Connect the two hoses and the faucet cord to the appliance as shown in fig.
Installation Flushing Moving the water purifier Flushing should take place when the water purifier: If you move the purifier from one place to another, you should remember the following points: is new and has never been used before Close the shut-off valve for the feed water before is reinstalled after having been stored/protected removing the feed water hose.
Need help?
Do you have a question about the RO 300 and is the answer not in the manual?
Questions and answers