Table of Contents
Advertisement
Packing List
Router x1
Installation Instructions
Connect the router to the power and connect the WAN port
to the broadband network.
Power supply socket
*The first network port on the right side of the power hole is the WAN port, and the second, third
network port is LAN port.
If the router LED indicator is red and the network is not connected, please refer to "Configuring
the Router".
When the router LED indicator turns white, the router has been successfully installed.
Power adapterx1 Network cablex1
Optical modem/
Broadband modem
or
Wall network socket
Advertisement
Table of Contents
