Table of Contents
Advertisement
8.1 Display and troubleshooting
Display
The monitor automatically checks its own system
when you switch it on and shows you any irregu-
larities in the display. To ensure that the display
is working properly, switch on the monitor. Press
and hold down the
3 seconds so that you can see the whole display.
All the display elements must be clear to see with
the accompanying symbol (please compare with
the drawing on this page). If this is not the case,
get in touch with the service centre.
NOTES
• A description of the symbols shown can
be found at the beginning of this
instruction manual.
• The device may also be switched on by
inserting a test strip.
4
-button
for approx.
G
Error display
On no account should you change your medi-
cation due to a measurement, which may be
incorrect. If in doubt, consult your service centre
or your doctor.
8 Miscellaneous
>
G
39
Advertisement
Table of Contents
