Download Print this page

GIGAMEDIA GGM CCDEHDI2F3M User Manual

Advertisement

Quick Links

USER MANUAL
Thank you for purchasing our products. Please read the manual
carefully before operating.
Safety Precaution
Warning
* Don't install the camera in extreme temperature conditions.Do use the camera
GGM CCDEHDI2F3M
uner conditions where temperature are within
* Please make sure the adapter is consistent with product specifications,
otherwise it might cause fire, electric shock or damage.
* Pay attention to polarity of the adapter, it might cause some accidents like fires.
* Please don't connect multiple cameras with the same adapter at the same time;
overloading of adapter capacity may cause fires.
* Power supply must be firmly fixed so as not to loose to cause fires.
* If the device gets
abnormal smell or smoke
contact with our customer service center.
* If the camera doesn't work as usual, please do not dismantle it by yourself.
Please contact our local distributor or our maintenance office authorized by our
company, otherwise we won't promise warranty.
* Please do not splash water on the product components when cleaning.
Technical Specifications
Model:
GGM CCDEHDI2F3M
Signal System:
PAL
Sensor:
1/3'' CMOS
Resolution :
1200 TV lines
Lens:
3.6mm
Minimum Illumination:
0 LUX (IR ON)
S/N Ratio:
More than 52 dB
IR Distance:
15-20 Metres
LED :
24PCS LED
Video Output:
1Vp-p 75Ω . Y/C Separated
Connector video :
BNC
Operation Temperature:
-20°C to +50°C
Supplied Power:
12VDC(+/-10%)
-20°C to +50°C.
", please stop it immediately and

Advertisement

loading
Need help?

Need help?

Do you have a question about the GGM CCDEHDI2F3M and is the answer not in the manual?

Questions and answers

Summary of Contents for GIGAMEDIA GGM CCDEHDI2F3M

  • Page 1 * Pay attention to polarity of the adapter, it might cause some accidents like fires. GGM CCDEHDI2F3M * Please don’t connect multiple cameras with the same adapter at the same time;...
  • Page 2 Installation Troubleshooting 1.No picture or unstable Check the connection of video line or power line 1. Connect the terminating wire of the cable directly to the DC power source.. 2.The image is so blurred 2. Connect the BNC end of the Camera Cable to an extension cable, or directly to 1)Checking is there something dirt on the lens, then use customized lens paper or a DVR / Observation System or to a TV/Monitor.