Connect And Disconnect Devices And Access The Internet; What Do I Do If I Can't Connect A Device To The Nighthawk M6?.52; What Do I Do If I Can't Access The Internet - NETGEAR MR6550 User Manual

Connect and disconnect devices and access
the Internet
Review these topics for answers to questions about connecting and disconnecting
devices and accessing the Internet.
What do I do if I can't connect a device to the Nighthawk
M6?
If you are experiencing problems connecting to the Nighthawk M6, try the following
suggestions:
• Turn off your Nighthawk M6 and take the battery out, wait 10 seconds, put the battery
back in, and turn your Nighthawk M6 on.
• Restart your computer or Wifi device.
• Turn off or temporarily disable any security programs or firewalls.
• If possible, try using another computer or WiFi device to connect to your Nighthawk
M6. If you can, then the problem is with the device that cannot connect, not the
Nighthawk M6.

What do I do if I can't access the Internet?

If you are connected to the Nighthawk M6 but cannot connect to the Internet, try the
following suggestions:
• Check the display status on the Nighthawk M6's LCD screen.
• Make sure that network coverage is available in your area.
• Make sure that your SIM card is active and enabled with data services.
• Wait one to two minutes for the Nighthawk M6 to initialize.
• Check the device information screen to make sure the SIM information is displayed
(to ensure the MHS sees the SIM).
• Confirm that your account is activated and that no other Internet connections are
active.
• Switch your Nighthawk M6 off and on and restart your computer or WiFi device.
Frequently Asked Questions
Nighthawk M6
52 User Manual