Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Farm King FK351
- Page 1 OperatOr and parts Manual Box Scraper 48", 60", 72", & 84" Model 052011 FK351...
-
Page 3: Table Of Contents
Table of Contents - 48", 60", 72", & 84" Box Scraper Table of Contents Introduction ..........................4 Safety ............................5 • Safety ..........................5 • General Safety ........................6 • Start-up Safety .........................6 • Operation Safety ......................6 • Transport Safety .......................6 • Service and Maintenance Safety ..................7 • Storage Safety ........................7 • Safety Signs ........................7 • Safety Sign Installation ....................7... -
Page 4: Introduction
Introduction - 48", 60", 72", & 84" Box Scraper Introduction The Farm King Box Scraper features two 1/2" x 6" replaceable, back-to-back blades to make this a bi-directional scraper. The scarifier shanks are heat treated and are easily adjusted for depth. The Box Scraper is available in 5' 6' &... -
Page 5: Safety
Safety - 48", 60", 72", & 84" Box Scraper Safety Safety Instructions Remember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. -
Page 6: General Safety
• Read and understand the Operator’s Manual and all safety signs before operating, servicing, adjusting, repairing, or unplugging the equipment. • Do not attempt any unauthorized modifications to your Farm King product as this could affect function or safety, and could affect the life of the equipment. -
Page 7: Service And Maintenance Safety
Safety - 48", 60", 72", & 84" Box Scraper Service and Maintenance Safety • Stop engine, set brake, remove ignition key, and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging. • Support the equipment with blocks or safety stands before working beneath it. • Follow good shop practices including: - keep service area clean and dry - be sure electrical outlets and tools are properly grounded... -
Page 8: Assembly
Assembly / Operation - 48", 60", 72", & 84" Box Scraper Assembly Instructions Attach the upper 3-point a-frame members, to the lower 3-point hitch lugs as shown on page 10, with hardware as indicated. DO NOT tighten hardware. Align the a-frame top link and lower hitch holes in order to allow your hitch pins to pass through them. -
Page 9: Maintenance
Maintenance / Bolt Torque - 48", 60", 72", & 84" Box Scraper Maintenance Instructions Raise the Box Scraper off the ground. 2. Securely block off the frame. 3. Remove blade mounting bolts. 4. If the top side of the blade has not been used, reverse and reattach. If it has been used, replace blade. -
Page 10: Parts Drawings
Parts - 48", 60", 72", & 84" Box Scraper Box Scraper Assembly Drawing (SBX-4, SBX-5, and SBX-6) -
Page 11: Box Scraper Assembly Parts List (Sbx-4, Sbx-5 And Sbx-6)
Parts - 48", 60", 72", & 84" Box Scraper When Ordering Parts Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. -
Page 12: Box Scraper Assembly Drawing (Sbx-7)
Parts - 48", 60", 72", & 84" Box Scraper Box Scraper Assembly Drawing (SBX-7) -
Page 13: Box Scraper Assembly Parts List (Sbx-7)
Parts - 48", 60", 72", & 84" Box Scraper Item Part Number Description 343225 Main Frame Weldment (SBX-7) 343235 A-Frame Weldment 343209 Strap, Brace 346731 Cutting Edge 83-1/2" 2503045 Bolt 5/8"-11NC x 1-1/2" Plow Head 2500094 Nut 5/8"-11NC Toplock Hex Gr. 5 343195 Pin 7/8"... -
Page 14: Warranty
Repair Parts Limited Warranty Buhler Industries Inc. warrants Farm King replacement parts purchased after the expiration of the Buhler Industries Inc. Limited Warranty, and used and serviced as provided for in the Operator’s Manual, to be free from defects in materials or workmanship for a period of thirty (30) days from the invoice date for the parts. - Page 15 Warranty Requirements To be covered by warranty, each Farm King new product must be registered with Buhler Industries Inc. within thirty (30) days of delivery to original retail purchaser. If the customer decides to purchase replacement components before the warranty disposition of such components is determined, Buhler Industries Inc.
- Page 16 Warranty - 48", 60", 72", & 84" Box Scraper (Note that some provinces or states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusion may not apply to you.) This warranty gives you specific legal rights and you may also have other rights, which vary from province to province or state to state.
- Page 18 www.farm-king.com 301 Mountain Street South Morden, Manitoba Canada R6M 1X7 Ph.: 204.822.4467 | Fax: 204.822.6348 Toll Free: 888.524.1004 E-mail: info@buhler.com www.farm-king.com Equipment shown is subject to change without notice. ©2010 Buhler Trading Inc. Printed in USA. TSX:BUI a division of Buhler Industries Inc.