Table of Contents
Advertisement
(Only for TX-50DXW804)
Hotel mode
Hotel mode
Initial INPUT
Initial POS
Initial VOL Level
Maximum VOL Level
Button Lock
Remote Lock
Private Information
Quick Start
Welcome Screen
Import Welcome Screen
DVB-C Auto Channel List Update
Start Hotel Portal
Import Hotel Portal Url
Select
Change
RETURN
3. To exit the "Hotel mode":
Switch off the power with the [POWER] button
on the main unit or the [POWER] button
on the remote control or pressing [EXIT] button
on the remote control.
4. Explain the Hotel mode setup menu.
*
Quick Start setting can by copied to other TVs using
hotel model clone.
Clone from a product whose default configuration has
been changed may result in higher energy consumption
of the product.
Hotel Mode
Initial INPUT
Off
Off
Initial POS
Off
0
Initial VOL
Level
100
Off
Maximum
VOL Level
Off
Button Lock
Keep
On
Off
Remote Lock
On
Private
On
Information
Off
Off
Quick Start
Welcome
Screen
Import
Welcome
Screen
DVB-C Auto
Channel List
Update
Start Hotel
Portal
Import Hotel
Portal URL
ITEM
Select hotel mode ON/OFF
Select input signal modes.
Set the input, when each time power is switched on.
Selection:
Off/DVB-S/DVB-C/DVB-T/AV/HDMI1/HDMI2/HDMI3/HDMI4
*Off: give priority to the last memory. However, Euro
Model is compulsorily set to TV.
Select programme number.
Selection:
Off/0 to 99
*Off: give priority to the last memory
Adjust the volume when each time power is
switched on.
Selection/Range:
Off/0 to 100
*Off: give priority to the last memory
Adjust maximum volume.
Range:
0 to 100
Select local key conditions.
Selection:
Off/SETUP/MENU
*Off: altogether valid
*Setup: only F-key is invalid
(Tuning guide (menu) can not be selected.)
*MENU: only F-key is invalid
(only Volume/Mute can be selected.)
Select remote control key conditions.
Selected:
Off/SETUP/MENU/VOD
*Off: altogether valid
*Setup: only Setup menu is invalid
MENU: Picture/Sound/Setup menu are invalid
Select private information for VIERA Cast is Keep or Reset if
Hotel mode is set to [On] when TV power on.
Selection :
Keep/Reset
•Keep: private information for VIERA Cast is keep
•Reset: private information for VIERA Cast is reset
TV will operate in active standby if Quick Start is "On" and
*
Hotel Mode is enabled.
Orange LED indicates active standby.
Selection:
On/Off
*Note:
Changing the default configuration may result in higher
energy consumption of the product.
Can be switched on only if "Welcome screen" was installed.
Otherwise, item is inactive.
Welcome Image will be displayed as soon as possible
(approx. 6 seconds after power-up).
Welcome message must be loaded and activated in the hotel
mode.
The file name must be "welcome.jpg"( file size no bigger than
1MB).
Upload "welcome.jpg" to TV set form USB stick.
Welcome Screen will be displayed at power-up and will
disappear automatically or may be terminated by any key
press.
Welcome image can be cloned to other TV sets using
"hotel.pwd" clone feature.
The possibility to enable the automatic service list update and
to the "New service found" pop-up message (or disable "new
service found" popup .
Selection: On/Off
Allow user to start a Portal-Application with dedicated key.
Selection: Off/Home/App/Menu
Import Hotel Portal with USB:
Filename must be "hotel_url.txt"
Content of hotel_url.txt: e.g.
http://192.168.1.1/hotel/index.html
Located in root directory.
Existing file will be overwritten.
Activation: turn Off/On TV set.
File will be deleted at shipment : While pressing
[VOLUME ( - )] button on the main unit, press [MENU] button
on the remote control for more than 3 seconds.
22
Function
Advertisement
Table of Contents
